Routing; Direct Outputs - Yamaha 02R Owner's Manual

1. Press the [ROUTING]
button.

ROUTING

The ROUTING display
function appears.
2. Select a channel using
the [SEL] buttons or the
CURSOR buttons.
3. Use the CURSOR buttons
to select the routing
destinations and press
the [ENTER] button to
switch a route ON or OFF.

Routing

The ROUTING display function is used to select the bus routing of the
input channels and tape and effect return signals. The first sixteen input
channels, 1 through 16, can also be routed to the direct outputs.
By default, all channels are routed to the stereo bus.

Direct Outputs

All the input channels and tape and effect return signals can be routed to
the output buses and the stereo bus. You can only route the first sixteen
input channels, MIC/LINE 1 through 16, to the direct outputs.
The outputs for the optional boards are as follows:
Slot Direct Out all OFF
Slot 1 Bus 1 to 8
Slot 2 Bus 1 to 8
Slot 3 Bus 1 to 8
Slot 4 Bus 1 to 8
If you select both direct out and an output bus for a channel, the direct
output will take priority.
Display Screens
Shown below is the first page of the ROUTING display function –
MIC/LINE 1 through 16 and LINE 17/18 through 23/24:
Select this screen by pressing a [SEL] button for one of the MIC/LINE
channels.
MIXING Display Functions
Direct Out all ON
Direct 1 to 8
Direct 9 to 16
Bus 1 to 8
Bus 1 to 8
Digital Recording Console 02R User's Guide
39