Table of Contents
Advertisement
Connecting the Display
Using the Computer
1.
Connect the signal cable. When attached, tighten the thumbscrews to secure
the connection.
2.
Connect the power cord into a proper power outlet that is easily accessible and
close to the display.
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
Power Cord
3.
Press
power on. When monitor power is turned on, the 'Self
Image Setting Function' is executed automatically.
NOTE
' Self Image Setting Function'? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for
individual input signals. If you want to adjust the monitor while in use, or wish to manually run this function once
again, push the 'AUTO' button on the front panel of the monitor. Otherwise, you may execute the ' Factory reset'
option on the OSD adjustment menu. However, be aware that this option initializes all the menu items except
'Language'.
Signal Cable
Digital signal
Analog signal
Wall-outlet type
PC-outlet type
PC
MAC
button on the front switch panel to turn the
*
2
1
*
A5
Mac adapter
For Apple Macintosh use, a
separate plug adapter is
needed to change the 15 pin
high density (3 row) D-sub
VGA connector on
thesupplied cable to a 15 pin
2 row connector.
Advertisement
Table of Contents
