Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LG AS55GD Series
Summary of Contents for LG AS55GD Series
- Page 1 OwNER'S MANuAL AiR PuRifieR Read this owner’s manual thoroughly before operating the appliance and keep it handy for reference at all times. Model Name: AS55GD Series www.lg.com MFL69726834 Rev.00_091917 Copyright © 2017 LG Electronics. All Rights Reserved.
-
Page 3: Table Of Contents
Table of Contents This manual is produced for a group of products and may contain images or content different from the model you purchased. This manual is subject to revision by the manufacturer. Safety instructions ......04 Maintenance ........28 Cleaning the Exterior ...... -
Page 4: Safety Instructions
Safety instructions READ THESE INSTRUCTIONS CAREFULLY This guide contains many important safety messages. Always read and obey all safety messages. This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill or hurt you or others, or cause damage to the product. All safety messages will be preceded by the safety alert symbol and the hazard signal word wARNING or CAuTION. - Page 5 • Do not install the product in an area exposed to direct sunlight or near heat-generating equipment. • Do not install the product in a place where combustible gas may leak or industrial oil or metallic particulates are present. POWeR •...
- Page 6 • If you detect any abnormal noise, odor or smoke, unplug the product immediately and contact an LG Electronics service center. • Only an authorized repair person from LG Electronics service center should disassemble, repair, or modify the product. • Do not use or store fire, combustibles (ether, benzene, alcohol, drugs, propane, butane, combustible spray, insecticide, air freshener, cosmetics etc.) or flammable materials (candles,...
- Page 7 • Do not impact the product. • Be careful not to allow any part of your body to be pinched when you detach and re-attach parts of the product. • unplug the product when not in use for a long time. •...
- Page 8 Caution To reduce the risk of fire, electric shock, or personal injury when using the product, follow basic safety precautions, including the following: iNSTALLATiON • Do not tilt the product to pull or push it while transporting. • Do not install the product in transportation equipment (vehicle/ vessel etc.).
- Page 9 • Do not climb or place objects on top of the product. • Do not operate the product with wet hands. • Do not let the moisture from the humidifier directly touch the product. • Do not use the product while it is not in upright position. •...
-
Page 10: Unpacking
unpacking Parts Owner’s Manual Air Purifier Owner’s Manual • The appearance or components of the product may differ depending on the model. • The shape of the power plug differs depending on the country. -
Page 11: Removing Packing Materials
Removing Packing Remove the support located at the filter inlet. Materials unpack the product and remove any packing tape or protective vinyl before using the product. Support Pull out the product from the packaging and remove the fixing tape attached on the product. Grab the top end of the back cover and gently pull it. - Page 12 Insert the fixing parts at the bottom of the cover into the holes at the bottom of the product before you close the cover. Caution • Failure to remove the support may affect the performance of the product. Please be sure to remove it before use.
-
Page 13: Installation
installation Transporting or Moving the installing the Product Product Caution Caution Install the product on a strong level surface. Installing the product on a weak Transport the product in a well-secured or tilted surface may cause noise and and upright position. Impacts may cause vibration or tipping, resulting in injury. -
Page 14: Operation
Operation Product Overview front View Air Outlet Status Panel It discharges purified air through the use it to check the settings of the filter. product and the air quality. Control Panel Light Lamp use it to set the product functions. It displays the overall air quality using Air ionizer a colored light. - Page 15 Back View Smart Diagnosis Part Smell (Gas) Sensor In the event of a malfunction or failure, It detects a smell (gas). you can use the Smart Diagnosis filter option to check the product condition. (See Smart functions.) It removes allergic materials, yellow dust/ultra-fine dust, possible sources of sick house syndrome, smog and PM 1.0 (super ultra-fine dust)
- Page 16 filter System Total Harmful Gas Care filter Caution It removes harmful smells (gas) that • The Total Harmful Gas Care Filter and are generated in everyday life such Total Allergen Collection Care Filter are as bathroom smell, cigarette smoke assembled together. Do not try to detach (smell) and food smell.
- Page 17 Control Panel Start/Stop Button indicator Button You can start or stop the operation. You can check the concentration of the airborne dust by its particle size. Speed Button Sleep Timer Button It allows you to adjust the wind strength of the product. Use it to schedule the time to turn off the product.
- Page 18 It turns on when the sleep timer function is activated. Displays fan speed It turns on when the 'On/Off Reservation' is set in the LG Smart ThinQ application. It turns on when the control panel is locked. It turns on when the ionizer turns...
-
Page 19: Getting Started
(ready) on the status panel. [Example of Purifier Speed 'Middle'] You can specify the sensor stabilization time in the 'Air Quality Sensor Operation Time' option in the LG Smart ThinQ Note application. • The speed is set to Auto when you first –... -
Page 20: Checking The Air Quality
Checking the Air Quality You can check the cleanliness of the indoor air by looking at the Light lamp and the status panel. understanding the Overall Air Quality The overall air quality is calculated based on the dust and smell (gas) concentrations and is categorized into 4 levels including green, yellow, orange or red depending on the contamination of the air. - Page 21 Checking Air Quality on the Sta- The above picture displays PM10/PM2.5/ PM1.0, meaning that the concentration of tus Panel super ultra-fine dust is higher than those of fine dust and ultra-fine dust. You may check the overall air quality, dust concentration, and smell concentration on while the color of the dust particle size the status panel.
- Page 22 PM2.5 density and is • The fine dust density could be affected based on LG Electronics standards. by cooking or using humidifiers, sprays or • The PM10 and PM2.5 densities displayed other products which generate steam or by the product could differ from the EPA fine particles.
-
Page 23: Using The Air Ionizer
using the Air ionizer Setting the Sleep Timer To generate ions to remove various bacteria You can set the product to stop automatically from the air. after running for the duration you set. Press the Sleep Timer button for more than Press the Sleep Timer button during the 3 seconds while operating. -
Page 24: Locking The Control Panel Buttons
Locking the Control Panel Buttons You can lock the buttons on the Control Panel to prevent the product from operating due to unforeseen reasons, such as a child manipulating the buttons. Press the Light button for at least 3 seconds during the operation. -
Page 25: Smart Functions
App Store/Google Play Store on your enclosed with the wireless router. smartphone. For more information on how to use 'LG Smart ThinQ’, refer to the Help in the • Install the wireless router at a location app. close to the product. The strength of... -
Page 26: Diagnosis Using Sound
LG Electronics service Open Source Software License center when the product malfunctions or fails. use this function only to contact the service Notice representative, not during normal operation. - Page 27 Place the phone near the product. • The microphone on your phone should face the Smart Diagnosis ) logo on the back. Do not remove the phone from the product while data is being transmitted. • You need to keep the phone near the product while the data is being transmitted for Smart Diagnosis.
-
Page 28: Maintenance
• How to distinguish between the front the sensor regardless of the cleaning and back of the product: There is an LG frequency (2 months) of the PM 1.0 logo on the front, while 'PM 1.0 & GAS sensor. -
Page 29: Cleaning The Exterior
Cleaning the exterior Cleaning the filter Separate the cover from the product. Remove dust from the air inlet and outlet using a vacuum cleaner. • For more information on how to remove and mount the cover, please see Removing Packing Materials. -
Page 30: Replacing The Filter
Replacing the filter Cleaning the Dust Sensor Remove the cover and replace the PM 1.0 (super ultra-fine dust) sensor filter. detects the fine dust as well as coarse dust. Therefore, you need to clean its lens • For more information on how to regularly. -
Page 31: Storage
Note Package the product to prevent the dust or foreign substance from Do not wipe the sensor with material other entering the product. Store the than water. It may cause a product failure. packaged product at a shaded place. Storage If the product is not used for a long period of time, store it at a shaded and dry place. -
Page 32: Before Calling For Service
Before Calling for Service If a failure occurs in the product, check the following before contacting the Service Center. Symptom Cause Solution The product does not is the power plug • Plug it into the outlet properly. operate. unplugged from the outlet? Did dust accumulate in •... - Page 33 Symptom Cause Solution • If the amount of the smell is more than the capacity of the product, the display may not Doesn’t the color change change. even if it is moved to a The Light lamp • Clean the sensor area. clean room? continues to stay •...
- Page 34 Symptom Cause Solution • The Ministry of Environment guide shows the average The overall air quality is the guide from the value over a certain period of is different from that Ministry of environment time, but the overall air quality of the Ministry of different from the product displayed on the product is...
- Page 35 Are you looking at the product. are different between same dust particle? the product and the • The difference in the values LG Smart ThinQ app. could be caused by the difference in update time between the LG Smart ThinQ app and the product.
-
Page 36: Product Specifications
Depth width The external appearance and dimensions of the product are subject to change without prior notice. Model AS55GD Series Power AC 220–240 V 50/60 Hz exterior dimensions 360 mm x 510 mm x 360 mm (Width X Height X Depth)