Page 3
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
Page 4
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
CONTENTS 1 INSTRUCTIONS FOR SAFETY 5 OPERATING THE PRODUCT 24 Keys ............25 AND ENVIRONMENT Function keys ........25 General safety ........4 Preparing the machine...... 25 Intended use ..........4 Programme selection ......25 Children’s safety ........5 Auxiliary functions ......27 Disposing of packaging material ..5 Scheduling the washing time ..
Instructions for safety and envIronment This section contains safety electric shock! instructions that will help to Never touch the plug with • give protection from risk of wet hands! Never unplug by personal injury or property pulling on the cable, always damage.
Instructions for safety and envIronment It must be used to do the Store all detergents and • • domestic type dishes only. additives in a safe place This appliance is intended away from the reach of the • to be used in household and children.
Instructions for safety and envIronment Compliance with WEEE collection points designated by the local authorities. Directive and Disposing of the Waste Product This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Installation To make the product ready for use, Do not install the product at places • make sure that the electricity, tap water where temperature may fall below supply and water drainage systems are 0ºC. appropriate before calling the Authorised Place the product on a rigid floor.
Installation Connection to the drain Electrical connection Water discharge hose can directly be Before you insert the plug into the wall connected to the drain hole or sink’s socket make sure that the voltage and drainage. The length of this connection the frequency shown in the rating label must be min.
Installation Fitting a different plug Initial use As the colours of the wires in the mains Before starting to use the product, make lead of this appliance may not correspond sure that all preparations are made in with the coloured markings identifying the accordance with the instructions in terminals on your plug, proceed as follows: sections “Important safety instructions”...
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy- Cleaning, rinsing and drying performance of efficient manner. your dishwasher will increase when water Wipe away any coarse food remnants on softening system is adjusted properly.
Page 15
Preparation 1 min. 1 Second 1 Minute Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet.
Preparation If the hardness level of the supply water is Salt reservoir will fill with water above 90 °dF or if you are using well water, when you start the product. then it is recommended to use water Therefore, add the softening purification devices and special filters.
Preparation Since different salt brands in the market have different particle sizes and since the water hardness may vary, dissolution of the salt in water may take a couple of hours. Therefore, Salt Indicator remains on for a while after adding salt into the machine.
Page 18
Preparation Do not put solvents into the detergent dispenser. There is risk of explosion! Put the detergent into the detergent dispenser just before operating the machine as illustrated below. Push the latch to right to open the detergent dispenser lid (A). If dishes have been waiting for a long time and have dried residues, fill the 5 cm³...
Preparation Combined tablet detergents Depending on the model, salt indicator and/or rinse aid Combined tablet detergents exhibit water indicator must be enabled again softening and / or rinse aid effect in if they were disabled before. addition to detergent effect. Some types of these detergents also contain special- Rinse aid purpose washing chemicals such as glass...
Page 20
Preparation Placing the dishes into the 3. Turn the rinse aid amount adjuster manually to a position between 1 and dishwasher 6 (4). If there are stains on tableware You can use your dishwasher in the items after washing, level must be optimum way with respect to energy increased and if there is a blue trace consumption and washing and drying...
Page 21
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware 19 / 43 EN Dishwasher / User’s Manual...
Preparation Adjusting the height of the upper basket Basket adjustment mechanism on the loaded upper basket of the machine is designed to allow you create taller areas in the upper or lower section of the machine based on your requirements by adjusting the height of the loaded basket in up or down directions.
Preparation Collapsible upper basket Cutlery basket tines Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an Upper basket of the machine is equipped efficient manner. with tines with gradual folding system (A) Since the cutlery basket can be moved (A, that you can lay down when you need a B), you can create more space while placing larger space for large dishes.
Preparation Collapsible lower basket Bringing the tines to the horizontal position by holding tines them from the tips may cause There are foldable tines (A) located at them to bend. Therefore, it the lower basket of the machine are will be appropriate to bring the tines in the middle to horizontal designed for an easier placement of large or vertical position by holding...
Preparation Upper cutlery basket The upper cutlery basket is designed for small dishes, or long items that cannot fit into the lower cutlery basket. After taking out the basket by lifting it up, remove the carrier part from the rails by pulling it towards yourself (C).
Operating the product On/Off key 2. Programme Selection / Programme Cancel (3 seconds) key 3. Function keys Half Load Function Fast+ Function SteamGloss Function AquaActive Function 4. Programme indicator 5. Salt indicator Not in use 7. Start / Cancel indicator 8.
Operating the product Keys Programme selection On/Off key Press the On/Off button to turn on When you press On / Off key, indicator your machine. lights illuminate on the display for ON 2. Check the Salt and Rinse Aid indicators position.
Page 28
Operating the product /43 EN Dishwasher / User’s Manual...
Operating the product Auxiliary functions AquaActive Function This function operates the lower impeller Washing programmes of your dishwasher with a higher pressure and higher speed to are designed to obtain the best cleaning enable a better washing for dishes such as effect, considering the type of the soiling, pans and trays with stubborn, dried soiling.
Operating the product Scheduling the washing 2. Press P+ key to activate the L: option. The interior lighting is turned off at time "L:0" option and turned on at "L:1" Time Delay option. Set the desired option with the If an economical electricity tariff is applied Time Delay key.
Operating the product Cancelling the programme displayed, close the door of the product and wait for the draining process complete. Open the door of the product Press Draining is completed in 2 minutes and the and hold the Programme Selection / machine gives an audible warning when it Programme Cancel keys for 3 seconds.
Operating the product End of programme is restored E:02 icon will disappear after a while and the washing programme When the programme you have resumes. selected comes to an end, an Overflowing warning audible warning signal will warn you to turn off your machine. If the machine intakes too much water or This audible signal will warn you there is leakage at any of the components...
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in order cleaned at regular intervals. for the machine operates efficiently. Check if food residues are left on the filters.
Maintenance and cleaning Cleaning the impellers 4. Clean all three filters under tap water by means of a brush. Clean the impellers at least once a week in 5. Replace the metal/plastic filter. order for the machine operates efficiently. 6. Place the coarse filter into the Lower impeller microfilter.
Maintenance and cleaning Upper impeller Top Impeller Check if the holes on the upper impeller (1) Check if the holes on the top impeller (1) are clogged. If they are clogged, remove of your machine are clogged. If they are and clean the impeller.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 37
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
Page 38
Troubleshooting the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour.
Page 39
Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
Page 40
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.
Repairs necessary as a direct or indirect The guarantee starts from the date of result of: original purchase of the product for a period of twelve (12) months unless Beko Accidental damage, misuse or abuse of plc (the “Manufacturer”) agrees to extend a product.
Page 42
The product must be correctly chargeable basis only. installed, located and operated in accordance with the instructions Does Beko offer replacements? contained in the User Instructions This is a repair-only guarantee. On Booklet provided with your product. occasion, the Manufacturer may at its •...
Page 43
Guarantee is unable to carry out a repair because a convenient appointment cannot be arranged. Will there be any charge for the repairs? It is your responsibility to provide evidence to the Engineer that your product is covered by this guarantee with a proof of purchase.
Page 44
Should you experience any difficulty in obtaining service contact the Beko Customer Helpline on Tel: 0333 207 9710 or e-mail: CustomerService@support.beko.co.uk ………………………………………………………………………………………………........…………… This guarantee is provided by Beko plc. Beko House, 1 Greenhill Crescent, Watford, Herts, WD18 8QU. Beko plc is registered in England and Wales with company registration number 02415578.