Table of Contents
Advertisement
36
GFK-2847Q
For public disclosure
3.9.5 Enable or Disable SNMP Agent
+
The QuickPanel
Operator Interface can be enabled as a Simple Network Management
Protocol (SNMP) Agent with the capability to communicate with SNMP Managers for
notification of Traps and responding to Query HMI Tag values.
Since it is designed to run over a public network, SNMP communication is disabled by
default on the QuickPanel
+
device for security reasons. As a security measure, the SNMP
feature requires a tactile input gesture to enable and disable SNMP communication.
Note Refer to the section
Simple Network Management Protocol (SNMP)
details.
Note Enabling or disabling SNMP communication is a one-time user configuration.
➢ ➢ To enable the SNMP Agent
From the Start menu, select Programs, System, and QuickPanel
1.
Settings Tool to display the QuickPanel
2.
Enable SNMP communication.
Click Yes to acknowledge the security
risk and enable SNMP communication .
Attention
+
OS Utilities Settings window.
From the QuickPanel
Settings window, select SNMP.
Double-tap Enable to enable
SNMP communication .
SNMP communication is enabled on the device only
when the user acknowledges this security dialog box
and clicks Yes.
QuickPanel⁺ Operator Interface User Manual
for further
+
OS Utilities
+
OS Utilities
Advertisement
Table of Contents
