Toshiba RS-TX20 Viewer's Manual page 124

C h a p t e r 8
The USB ports on the back of your DMS
A USB Wireless network adapter
(yours may look different)
An Ethernet USB network adapter
(yours may look different)
TiVo has recommendations for
compatible models of wireless and
®
wired (Ethernet) network adapters. Be
sure to check www.tivo.com/adapters for
the latest information.
116
C o n n e c t i n g t o a H o m e N e t w o r k
Home Networks
When we refer to a "home network," we mean two or more devices (probably computers),
connected to a router.
USB Ports, Wireless and Wired Network Adapters
On the back of your Digital Media Server, you will see two USB ports that can be used to
connect either a wireless or a wired (Ethernet) USB network adapter. Although you can
use either of these ports, only one network adapter can be connected at a time.
USB network adapters let a DMS use a USB port to communicate with other networked
devices. Whether you choose wireless or wired (Ethernet), you will need a network
adapter for each DMS you wish to connect.
Choosing Wireless or Wired (Ethernet). You can connect your DMS to your home
network using either a wireless or wired (Ethernet) connection. Here are some notes to
help you choose which approach you want to use.
• Wired (Ethernet). Ethernet connections are generally faster, less expensive, more
reliable and less susceptible to interference than wireless networks. To connect a DMS
to a wired (Ethernet) network, see "Connecting to a Home Network Using Wired
(Ethernet)" on page 119
• Wireless. Connecting your DMS wirelessly may be more convenient because you do
not have to run a cable from your DMS to another device. However, wireless networks
are typically more expensive and slower than Ethernet networks, and may be subject to
interference from appliances such as microwaves and cordless phones. To connect a
DMS to a home network wirelessly, see "Connecting to a Home Network Using a
Wireless Network Adapter" on page 117.