Table of Contents
Related Manuals for LG 55LV75A-7B.AUS
Summary of Contents for LG 55LV75A-7B.AUS
- Page 1 Easy Setup Guide LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. 55LV75A 55LV77A www.lg.com *MFL68606109* P/NO : MFL68606109 (1806-REV01) Printed in Korea...
-
Page 2: Assembling And Preparing
Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. SuperSign SW & Manual - Downloading from the LG Electronics website. - Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your model. - Page 3 ASSEMBLING AND PREPARING Dimensions (Width x Height x Depth) / Weight 1213.4 mm x 684.2 mm x 88.5 mm / 23 kg (47.7 inches x 26.9 inches x 3.4 inches / 50.7 lbs) To View the Owner’s Manual Insert CD-ROM in Computer. CD-ROM will open automatically.(for Windows only) If it does not run automatically, it is available to see the below sequence.
- Page 4 ASSEMBLING AND PREPARING PRECAUTION IN MOVEMENT - The illustration may look different from the actual product. Adhere to the warning signs printed on the Box. Do not tumble the Set box sideward down. Do not Clamp Do not drop from clamping. 2 Persons needed for transport Load with care.
-
Page 5: Precaution In Handling
ASSEMBLING AND PREPARING PRECAUTION IN HANDLING Precaution Move the Set as a team of 2 persons. When you move Remove the L-bracket on the corner of the Set be- the bare Set, please use one hand on grabbing the fore installation. When moving the Set, re-assemble handle and the other support under the Set. - Page 6 ASSEMBLING AND PREPARING Causes & Phenomena of the COF (CHIP ON FILM) DEFECT Line Defect The line defect would occur on your Set if you strike on ➙ ➙ Shock on Module Top Side Top COF Crack the edge of the Set. Vertical Line Defect Source PCB COF Cable...
-
Page 7: Installing The Product
ASSEMBLING AND PREPARING Installing the Product - The illustration may look different from the actual product. Cut Packing Strap of the Box. Cut Tape on the Box. Open the Box and remove the top packing. Remove the Upper Box. Open the Poly Bag. Undress the Poly Bag. - Page 8 ASSEMBLING AND PREPARING Lift up the Set using the SIDE/BACK Handle. Remove Bottom packing when lifting up the Set. With one hand under the set and the other hand grabbing the set, move the set. Lay the back of the Set down on the table.
- Page 9 ASSEMBLING AND PREPARING Use the cushion or Pad when you lay the face of the Set downward. Connect IR receiver to use remocon. And then, connect power cord.
-
Page 10: Tiling Displays
ASSEMBLING AND PREPARING Tiling Displays How to Join Sets How to Mount the Set Join other sets using screws for fixing the VESA wall mount in the same way as above. Example of 2 x 2 tiling Screws for attaching the VESA wall mount (M6) Screws (15-M4) ≤... -
Page 11: Remote Control
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the Monitor set correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching ends to the label inside the compartment, and close the battery cover. - Page 12 REMOTE CONTROL AUTO INFO Automatically adjusts picture Displays the input position and minimizes image information. instability.(RGB input only) SETTINGS W.BAL Accesses the main menus Enters the White Balance or saves your input and exit menu. menus. S.MENU (SuperSign Menu Key) This button does not apply to Selects menus or options and this model.
-
Page 13: Making Connections
MAKING CONNECTIONS MAKING CONNECTIONS NOTE Connect the signal input cable and tighten it by turning the screws clockwise. -
Page 14: Connecting The Power Cord
MAKING CONNECTIONS Connecting the Power Cord Power Button Connecting the External devices HD Receiver HDMI HDMI Component Component Component Speaker Memory storage Camcorder/ Camera Gaming device HDMI HDMI HDMI Component Component Display Port... -
Page 15: Daisy Chain Monitors
MAKING CONNECTIONS Daisy Chain Monitors DP Cable Use the cable provided with the product or use a DisplayPort certified cable version 1.1a or higher. Monitor 1 Monitor 2 Monitor 3 Monitor 4... -
Page 16: Function Setting
MULTIVISION CONFIGURATION MULTIVISION CONFIGURATION Function Setting Set ID setup for each set. (* The model 55LV75A does not support any functions for controlling the Fan.) IR Receiver connection. OPTION Move Back of the product. • Language • ISM Method : Normal •... - Page 17 Monitor 3 Monitor 4 RS-232C Cable Installation Menu setup. Installation Menu (V 2.21) LG Digital Signage Setup White Balance Adjust Password Change Configuration Cloning Set ID Setup Tile Mode setup. (* The model 55LV75A does not support any functions for controlling the Fan.)
- Page 18 MULTIVISION CONFIGURATION Setting the Tile Mode In Tile Mode you can view an image in a larger scale by connecting multiple monitors. When using 2 monitors ID 2 ID 1 Tile Mode Off: An input image is not enlarged, and the same image is shown on all connected monitors.
- Page 19 ► Close Set the Total Set ID in the Installation Menu. NOTE For example, if the Picture ID is assigned to LG Digital Signage Setup (V2.21) 2, the upper right display (Set ID: 2) can be ▲ • Factory Reset controlled by IR signals.