Table of Contents
Advertisement
EX65 Explosion-Protected Camera
8.4
Main menu structure
Item
Mode
ALC
Shutter/AGC
Day/Night
Enhance / Dynamic Engine
Color
VMD
8.4.1
Mode submenu
Item
Mode
Mode ID
Copy active
mode
Default mode
EXIT
8.4.2
ALC submenu
Item
ALC level
Peak/average
ALC speed
DVR/IP Encoder
EXIT
Bosch Security Systems, Inc.
Selection
Submenu
Submenu
Submenu
Submenu
Submenu
Submenu
Submenu
Selection
1 to 6
Alphanumeric
Available mode
numbers
Submenu
Selection
Description
-15 to +15
Selects the range within which the ALC will operate. A
positive value is more useful for low-light conditions; a
negative value is more useful for very bright conditions.
Some ALC adjustment may improve scene content when
Smart/BLC is enabled.
-15 to +15
Adjusts the balance between peak and average video
control. A negative value gives more priority to average
light levels; a positive value gives more priority to peak
light levels. Video iris lens: choose an average level for
best results (peak settings may cause oscillations).
Slow,
Adjusts the speed of the video level control loop. For
medium, fast
most scenes it should remain at the default value.
On, Off
On - The camera output is optimized for connection to a
DVR or IP encoder to compensate for compression
methods.
Off - The camera output is optimized for connection to an
analog system (matrix switcher or monitor).
Returns to main menu.
Installation Manual
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Description
Sets up operating modes 1 to 6
Video level control
Shutter and automatic gain control
Day/Night for color/mono operation
Picture enhancement and performance
White balance and color rendition
Video motion detection
Description
Selects operating mode.
Mode name (11 characters maximum)
Copies current mode settings to the mode number
selected.
Restores camera to the factory default settings.
Returns to main menu.
Operation | en
31
2016.03 | 1.0 | F.01U.318.222
Advertisement
Table of Contents
