Sharp MD-DS8 Operation Manual page 46

MD-DS8
Using with the alkaline battery
1. Open the battery case supplied with the unit.
2. Insert the AA size battery [LR6] into the battery
case by matching its plus and minus terminals
to the diagram in the battery case, and then
close the battery case.
3. Align the protuberance on the battery case with
the indentation on the side of the unit.
4. Turn the fixing screw on the battery case toward
the word "LOCK", and then make sure that the
battery case does not move.
Do not insert a rechargeable battery (such as
nickel-cadmium rechargeable battery) into the
battery case.
To change the initial setup
1. Insert a MiniDisc.
2. Press down the
more on the remote control while in the stop mode.
After "SET UP" is displayed, "BEEP on" or
"BEEP off" will be displayed.
3. Press the or
you want to change.
BEEP on autoPLAY
4.Press the
MODE
select the item you want to change.
46
button for 2 seconds or
MODE
button to select the menu
autoPS LIGHTnor
button on the remote control to
Beep sound
Auto play
Auto power save
Operation indicator
Display on the remote control
Backlight on the remote control
"LIGHTnor"
Operation indicator
Display on the remote control Indicated.
Backlight on the remote
control
"LIGHTall"
Operation indicator
Display on the remote control Indicated.
Backlight on the remote control Lit.
"LIGHToff"
Operation indicator
Display on the remote control Indicated for approx.
Backlight on the remote
control
Operation indicator while
charging
5. When the setup is completed, press the
OFF
ON
BEEP off
BEEP on MD-DS8
PL off
autoPLAY
autoPS PS off
See below.
Flashing.
Lit for approx. 10 seconds
when operated.
Lit.
Goes out.
( W h e n c h a r g i n g o r
immediately after an MD
is inserted, it lights up or
flashes.)
10 seconds when operated.
Lit for approx. 10 seconds
when operated.
Goes off 30 seconds
after charging starts.
(Charging is continuously
performed.)
button.