Table of Contents
Advertisement
■ Optional Signaling
Your dealer may also program several types of optional
signaling for your transceiver channels.
2-tone Signaling: 2-tone Signaling opens the squelch only
when your transceiver receives a call containing matching 2
tones.
DTMF Signaling: DTMF Signaling opens the squelch only
when the transceiver receives a call containing a matching
DTMF code.
FleetSync Signaling: Refer to "S
C
)" on page 20.
ALLING
NXDN ID Signaling: NXDN ID is an optional signaling
system available only for digital communications.
V
O
OICE
PERATED
VOX can be activated or deactivated by your dealer. VOX
operation allows you to transmit hands-free.
Note: To operate VOX, you must use an optional KHS-11, KHS-14,
KHS-15-BH, or KHS-15-OH headset.
■ VOX Gain Level (NX-200/ NX-300/ NX-200G/ NX-300G Only)
1 Connect the headset to the transceiver.
2 Press the key programmed as VOX.
•
The current VOX Gain level appears on the display.
3 Press
level.
•
The VOX Gain can be adjusted from levels 1 to 10.
4 While adjusting the level, speak into the headset
microphone to test the sensitivity level. (Your voice is
not transmitted during this test procedure.)
•
When sound is recognized, the LED lights orange.
5 Press
T
RANSMISSION
/
to increase or decrease the VOX Gain
to save the setting.
(S
ELCALL
(VOX)
ELECTIVE
27
Advertisement
Table of Contents
