Installation Of Rubber Drain Hose Adaptor; Installation Of Mounting Brackets - Bosch Evolution SGE63E05UC Installation Instructions Manual

Installation of Rubber Drain Hose Adaptor

For a large port, use the drain hose as it is.
1. For a small port, insert the rubber drain hose adaptor
into the drain hose end.
2. Obtain the Rubber Drain Hose Adaptor spring clamp from
the Dishwasher Installation Kit (do not substitute).
3. Insert the dishwasher drain hose into the
drain hose (see Figure 12). Be sure to fully insert the
drain hose.
4. Use the clamp provided to attach the Rubber Drain Hose
Adaptor to the house plumbing
10
end of the
Figure 12
Figure 13
Screw
Clamp

Installation of Mounting Brackets

Before installing the supplied countertop mounting
brackets, decide which method of securing the
dishwasher into its enclosure will be used. Once the
mounting brackets are installed on the dishwasher,
removing them is difficult and will damage the
mounting brackets and the dishwasher.
The dishwasher can be secured into its enclosure in two
ways:
1. Top Mount is used for countertops made of wood or
other materials that can easily drilled. Orient the mount-
ing brackets as shown in Figure 14, and position the two
small tabs on the mounting brackets over the two slots
Top Mount
Figure 14
1. Side Mount is used for countertops made of marble,
granite, or other very hard materials that cannot be easily
drilled. Bend the mounting brackets along the small
holes and in the same direction as the two small tabs.
Orient the mounting brackets as shown in Figure 15, and
position the two small tabs on the mounting brackets
over the two slots on the dishwasher's front corners.
tabs into the slots.
Figure 15
Side Mount