After cleaning
After cleaning, leave the grease filter
to dry on an absorbent surface before
refitting it.
When removing the filter for cleaning,
also clean off any residues of oil or fat
from the now accessible casing to
prevent the risk of these catching fire.
Refit the grease filter.
Cleaning and care
Resetting the grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be reset.
While the fan is switched on, press
the operating hours control for
approx. 3 seconds until only 1 is
flashing.
The grease filter symbol goes out.
If you want to clean the grease filter
before the operating hours counter has
reached its maximum:
Press the operating hours control
for approx. 6 seconds until only
1 is flashing.
Change grease filters
Regular use and cleaning can cause the
filter surfaces to wear.
If you notice any damage, replace the
grease filter.
You can obtain the grease filter from
Miele customer service (see end of
these operating instructions) or your
Miele specialist dealer.
35