Fleetsync: Alphanumeric 2-Way Paging Function - Kenwood TK-8302U Instruction Manual

FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION

FleetSync is an Alphanumeric 2-way Paging Function and is a protocol owned by
Kenwood Corporation.
Note: If set up by your dealer, your transceiver may use the MDC-200 feature in place of
FleetSync. MDC-200 and FleetSync cannot be operated simultaniously.
S (S
elcAll electiVe
A Selcall is a voice call to a particular station or to a group of stations.
n Transmitting
1 Select your desired zone and channel.
2 Press the <B and C> keys to select the ID of the station you want to call, or
enter a station ID using a DTMF keypad.
3 Press the microphone PTT switch and begin your conversation.
n Receiving
If enabled by your dealer, an alert tone will sound and the LED will blink when
a Selcall has been received.
To respond to the call, press the PTT switch and speak into the microphone.
n Identification Codes
An ID code is a combination of a 3-digit Fleet number and a 4-digit ID number.
Each transceiver must have its own Fleet and ID number.
Note: The ID range may be limited by programming.
p c
Aging All
1 Select your desired zone and channel.
2 Press and hold the key programmed as Paging Call for  second to transmit
your PTT List ID, to request a call.
S m
tAtuS eSSAge
You can transmit pre-programmed status messages by pressing the keys
programmed as Status 1 and Status 2.
Status messages are 2-digit codes ranging from 0 to 99 (80 ~ 99 are reserved
for special messages), containing messages of up to 6 alphanumeric characters.
gpS r
eport
If a GPS unit (NMEA-083 format) is installed on your transceiver, you can press
the key programmed as Send the GPS data to send your location data.
c )
Alling
9