Replacing An Ink Tank; Getting The Ink Level Information - Canon PIXMA iP6600D Series Direct Printing Manual

Replacing an Ink Tank

Replacing an Ink Tank
Replacing an Ink Tank Replacing an Ink Tank
Replace ink tank(s) if they are out of ink. When replacing them, check the model numbers and
their installation positions.
With this printer, ink tanks must be installed from the right in the order indicated below.
Black:
CLI-8BK
PhotoMagenta:
CLI-8PM
Be sure to install the ink thanks in the correct order. The proper arrangement
from the left is Black, Cyan, Photo Cyan, Photo Magenta, Magenta, Yellow.
Should missing characters or white streaks appear despite sufficient ink
levels, see "When Printing Becomes Faint or Colors are Incorrect" on
page 54.

Getting the Ink Level Information

You can confirm the ink level in each ink tank through the ink tank lamps. Open the cover of the
printer to see how the ink tank lamps light or flash.
Ink is low: Ink is low: Ink is low: Ink is low:
The ink tank lamp flashes slowly (at about three second interval). Prepare a new ink tank.
Ink is out: Ink is out: Ink is out: Ink is out:
The ink tank lamp flashes quickly (at about one second interval), Replace the ink tank with a new
one.
50
Cyan:
CLI-8C
Magenta:
CLI-8M
.....Repeat
.....Repeat
PhotoCyan:
CLI-8PC
Yellow:
CLI-8Y