Installing and Removing the Battery
and Card
Load a fully charged Battery Pack LP-E17 into the camera. The camera can
use an SD, SDHC, or SDXC memory card (sold separately). UHS-I Speed
Class SDHC and SDXC memory cards can also be used. The captured
images are recorded onto the card.
Make sure the card's write-protect switch is set upward to enable writing/
z
erasing.
Installing the Battery and Card
( 1 )
( 1 )
1
Open the cover.
( 2 )
z
( 1 )
2
Insert the battery.
z
z
( 2 )
3
Insert the card.
z
( 2 )
Slide the lever as shown by the arrows
and open the cover.
Insert the end with the battery contacts.
Insert the battery until it locks in place.
As shown by the illustration, face the
card's label side toward the back of
the camera and insert it until it clicks
in place.
37