English HEAVY-DUTY ROTARY HAMMER D25413, D25414, D25415, D25430 Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data D25413...
Machinery Directive Denotes risk of fire. General Power Tool Safety Warnings Heavy-Duty Rotary Hammer D25413, D25414, D25415 WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and WALT declares that these products described under instructions may result in electric shock, fire and/or Technical Data are in compliance with: serious injury.
English c ) Do not expose power tools to rain or wet conditions. c ) Disconnect the plug from the power source and/or Water entering a power tool will increase the risk of the battery pack from the power tool before making electric shock.
1 Side handle • Keep the power cord away from the rotating bit. Do not 1 Depth adjustment rod (D25413, D25414, D25415 only) wrap the cord around any part of your body. An electric 1 Kitbox cord wrapped around a spinning bit may cause personal 1 Keyless chuck (D25414 and D25415 only) injury and loss of control.
Anti Rotation System D25415 (Fig. B) LED Indicator (D25415 only) The anti rotation system offers increased user comfort and Depth adjustment rod (D25413, D25414, D25415 only) safety through an on-board, anti-rotation technology capable of detecting if the user loses control of the hammer. When a Depth stop clamp jam is detected, the torque and speed are reduced instantly.
Page 10
7 (Fig. F) 3. Push the bit down and turn it slightly until it fits into the slots. D25414 and D25415 only 4. Pull on the bit to check if it is properly locked. The 1. Turn the locking collar 12 ...
English Rotary Drilling (Fig. C) WARNING: To reduce the risk of serious personal injury, ALWAYS hold securely in anticipation of a D25413, D25414, D25415 only sudden reaction. 1. Set the mode selector switch to the rotary drilling 4 Proper hand position requires one hand on the side handle 6 ...
English Motor Brushes WALT uses an advanced brush system which automatically stops the drill when the brushes wear out. This prevents serious damage to the motor. New brush assemblies are available at authorised D WALT service centers. Always use identical replacement parts.
Page 16
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)