Intended Use; Assembly And Adjustments - DeWalt D25851 Instruction Manual

FIG. 1
CHISEL BIT ADJUSTMENT MODE
HAMMERDRILLING
MODE
CHISEL BIT ADJUSTMENT MODE
J
H
C
D25602

INTENDED USE

D25501, D25601, D25602
Your rotary hammer has been designed for professional rotary drilling
and chipping applications.
CHIPPING
D25820, D25831, D25851
MODE
Your chipping hammer has been designed for professional chipping,
chiselling and demolition applications.
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
These hammers are professional power tools. DO NOT let children
come into contact with the tool. Supervision is required when
E
inexperienced operators use this tool.
I
F

ASSEMBLY AND ADJUSTMENTS

D
disconnect tool from power source before installing and
A
removing accessories, before making any adjustments or
removing/installing attachments or accessories. An accidental
start-up can cause injury.
B
G
Side Handle (Fig. 1)
the tool with the side handle properly installed and securely tightened.
E
Failure to do so may result in the side handle slipping during tool
operation and subsequent loss of control. Hold tool with both hands
to maximize control.
The side handle clamps to the front barrel (collar) and may be rotated
360° to permit right or left-hand use. For operating convenience, the
side handle can be installed in front or rear positions.
31
WARNING: To reduce the risk of injury, turn unit off and
WARNING: Prior to assembly and adjustment, always unplug tool.
WARNING: To reduce the risk of personal injury, ALWAYS operate