NEC MultiPresenter Stick DS1-MP10RX2 Important Information Manual page 21

DETAIL SETTINGS (SMART
Item
PIN TYPE - ONE-TIME
The
stopping to access to the network.
- STATIC
Set up random number for the
SECURITY TYPE Select this when [ONE-TIME] is set for
- SIMPLE
Consists of 8 digits number which is two times
repetition of the
- RANDOM
Automatically create eight digits security key.
SECURITY KEY Set this when [STATIC] is selected for
PIN CODE Set this when [STATIC] is selected for
CHANNEL Select a wireless channel.
DETAIL SETTINGS
Item
SITE SURVEY • Run the site survey and display the detected ac-
cess points.
• The maximum of 64 access points can be dis-
played.
• Only one access point with the same name as SSID
is displayed.
• The applicable access points are the securitydis-
abled WPA-PSK, WPA2- PSK.
• A " Key" mark is attached when the security setting
of the access point has been enabled.
SECURITY SETTING Select security type.
- [DISABLE]
Disable the security setting.
- WPA2-PSK
Input column for the security key is displayed.
- WPA/WPA2-PSK
Input column for the security key is displayed.
SSID Set the SSID
CONNECTION)
Description
PIN CODE is automatically created every time
PIN CODE.
(INFRASTRUCTURE)
Description
ENG-11
- The default factory setting Is
TIME].
PIN CODE.
PIN TYPE.
PIN TYPE. - Consists of 8 to 63 alphanumeric char-
acters.
PIN TYPE. - Four numbers
- The default factory setting is "6".
Note: If any access point is not detected,
select
[RECONNECT] on the WIRELESS LAN SET-
TING screen.
- The default factory setting is [DISABLE].
- The security key consists of 8 to 63
alphanumeric characters.
- The default factory setting is "NECDS".
- SSID consists of 1 to 32 alphanumeric
characters.
Remarks
Remarks
[SITE SURVEY] again after selecting
[ONE-