Image
Saturation: Adjust the saturation of the image.
Note:
Not available with computer sources.
Hue Adjust the hue of the image.
Note:
Not available with computer sources.
Aspect Ratio: Adjust the aspect ratio to match the video source. Options are:
Auto: Automatically selects the appropriate display format.
y
4:3: The input source scales to fit the screen and projects a 4:3 image.
y
16:9: The input source scales to fit the screen and projects a 16:9 image.
y
16:10: The input source scales to fit the screen and projects a 16:10 image.
y
Zoom: Zoom in or out of the image.
Color Temperature: Select the color temperature. Options are: Warm, Medium, and
Cold.
Note:
The Color Temperature function is not supported in Bright, Eco, and 3D modes.
Color Space: Select an appropriate color matrix type. Options are: Auto, RGB, and
YCbCr.
Note:
The Color Space function is supported only in HDMI mode.
Frequency: Change the display data clock frequency to match the frequency of your
computer's graphics card. If you see a vertical flickering wave, use the Frequency
control to minimize the bars. This is a coarse adjustment.
Note:
The Frequency can be adjusted only in VGA mode.
Phase: Synchronize the signal timing of the display with the graphic card. If the
image appears to be unstable or flickers, use the Phase to correct it. This is a fine
adjustment.
Note:
The Phase can be adjusted only in VGA mode.
24 English
Image
Saturation
Hue
Aspect Ratio
Zoom
Color Temperature
Color Space
Frequency
Phase
Select
Exit
Auto
Warm
RGB
Enter