Table of Contents
Advertisement
5
On the remote control, within 6 seconds
twice then Volume + once, and
press
then hold down SOUND until upgrade
information appears on the TV screen.
» Then "UPG" (upgrade) blinks on the
display panel.
» If a USB flash drive is not connected or
invalid upgrade file is found, "ERROR"
(error) is displayed on the display
panel.
6
Press
on the remote control to start
the upgrade.
7
Wait until the upgrade is completed.
» If the upgrade is complete, this product
automatically turns off and on again.
Note
•
The upgrade time may take around 3 minutes.
14
EN
6 Wall mount
Before you mount this product on the wall,
read all safety precautions.
Note
•
Improper wall mounting may result in accident, injury or
damage. If you have any query, contact Consumer Care
in your country.
•
Secure the wall mount to a wall that can support the
combined weight of the product and the wall mount.
Screw length/diameter
Depending on the type of wall supporting this
product, make sure that you use screws of a
suitable length and diameter.
≤ 9 mm/
0.35"
>25 mm/0.98"
See the illustration in the quick start guide on
how to wall mount this product.
Mount the front speakers (optional)
1) Mark two holes on the wall using a supplied
wall bracket, then secure two suitable screws
on the wall as indicated by two holes.
2) Fix a supplied wall bracket onto a speaker.
3) Hang the speaker on the screws which are
secured on the wall.
3.5 mm/
0.14"
Advertisement
Table of Contents
