YVC-1000MS User's Manual
Changing the setting of the
audio output terminals
Change the setting depending on the device connected
to the audio output terminals.
Audio output terminals
■
Adjusting the audio output volume
The sound may crack or become faint in the remote
location depending on your environment. In this case,
adjust the audio output volume.
1
In the "YVC-1000 Configurator"
window, select the "AUDIO OUT" tab.
2
Select the volume from the "OUTPUT
VOLUME" drop-down list.
The volume can be set in 3 dB steps between -12 dB
(minimum) and +12 dB (maximum).
40
Select
Changing the setting of the
USB port
Change the setting depending on the device connected
to the USB port.
USB port
■
Setting the data transfer rate of the
USB port
1
In the "YVC-1000 Configurator"
window, select the "USB" tab.
2
Select the data transfer rate.
Setting
HI-SPEED
FULL-SPEED
Select
Description
Transfers data in USB 2.0 High
Speed mode.
Transfers data in USB 2.0 Full
Speed mode.