Table of Contents
Advertisement
Operation
No response when any
buttons pressed.
Play fails to start or
stops soon after
starting.
No response when
remote control buttons
pressed.
Cannot add markers.
There are already
markers. [RAM]
Sound
There is a lot of noise.
No sound from the
unit's speaker.
No sound from other
speakers.
Cannot play multi
channel surround
sound
Distorted sound.
Piercing noise comes
from the speakers.
Sound effects do not
work.
Cannot record to digital
recording equipment.
(Incorrect sound
recorded.)
FM transmitter does not
work.
≥
Some discs prohibit certain operations.
≥
If there is no response at all, the unit may have been affected by
lightning or static electricity. Turn the unit off and on again. Alternatively,
turn the unit off, disconnect the power source (AC or battery pack),
reconnect the power and turn the unit on again.
≥
Condensation has formed: Wait 1 to 2 hours for it to evaporate.
≥
This unit cannot play discs other than those specified. (5)
≥
Clean the disc. (33)
≥
Ensure the disc is inserted correctly. (8)
≥
Check that the disc has something recorded on it.
≥
Check that the batteries are installed correctly. (7)
≥
The batteries are depleted: Replace it with new ones. (7)
≥
Point the remote control at the remote control sensor and operate. (7)
≥
You cannot add markers while playing a playlist or discs that do not
show the elapsed time.
≥
The unit reads and displays the markers added with a DVD video
recorder.
≥
Move unit away from mobile phones.
≥
Noise may occur when playing WMA files.
≥
The speaker is off if the LCD is closed or headphones are connected.
≥
Turn up the volume. (8)
≥
Check all connections and settings. (21), (23)
≥
Output is in stereo (PCM) if you have changed the play speed.
≥
This unit plays DVD-Audio in 2 channels.
≥
Turn Advanced Surround off if this occurs. (12)
≥
If you have connected a digital amplifier which does not include a
decoder, be sure to select "PCM" in "Dolby Digital" or "DTS Digital
Surround" in "Audio". (21)
≥
Dialogue enhancer and Advanced Surround do not work when the unit
is outputting bitstream signals. (21)
≥
Advanced Surround does not work if you have changed the play speed.
(10)
≥
Some audio effects do not work or have less effect with some discs.
≥
You cannot record WMA/MP3.
≥
You cannot record DVDs that have protection preventing digital
recording.
≥
You cannot record DVDs if the recording equipment cannot handle
signals with a sampling frequency of 48 kHz.
≥
Make the following settings:
– Advanced Surround:
– PCM Digital Output:
– Dolby Digital/DTS Digital Surround: PCM (21)
≥
FM transmitter does not work when the audio/video cable or
headphones are connected.
Off (12)
Up to 48 kHz (21)
31
RQT7682
Advertisement
Table of Contents
