Acer PD100 Service Manual page 24

No Step
7 Check the 1. In the "Read Item"
whole process
Note: If the code in the
Serial Blank is scrambled,
please make a check in
"Trans".
2. Click on "Read" to read
3. The "EDID Informations"
4. Click "Reset" to do the
Chapter2
Procedure
Selections, choose the
Port that you use.
Ex: If you use the Analog
Port, choose "Analog" in
the "Read Item".
EDID information.
will show the result.
next unit or "Exit" to close
the EDID program.
3
Note
Photo
2
4
1
18