Editing Effect Parameters; Adjusting The Effect Depth For Each Part; Selecting An Effect Type For Each; Block - Yamaha PSR-S975 Reference Manual

Editing EFFECT Parameters

This instrument features six Effect Blocks, giving you powerful tools to richly enhance the sounds of the
instrument or completely transform them. The Effects are divided into the following groups:
 Reverb, Chorus:
The Effects of these Blocks are applied to the overall sound or all Parts. In each of these Effect Blocks, you
can select only one Effect Type at a time and adjust the Send Level (Depth) for each Part as well as the
Return Level for all Parts.
 DSP1:
When the "Connection" parameter is set to "System" in step 2 of
applied only to the Style and Song sounds. In this status, you can select only one Effect Type at a time and
adjust the Send Level (Depth) for each Part as well as Return Level for all Parts. When the "Connection"
parameter is set to "Insertion," the Effect of this Block is applied to a specific channel of the Style and Song.
 DSP2-4:
The Effects of these Blocks are applied to a specific Part or Channel, with the exception of the Multi Pads
and microphone/guitar input. Different Effect Types can be selected for each of the available Parts or
Channels.

Adjusting the Effect Depth for Each Part

Use the [B]–[E] or [G]–[J] buttons to select the desired Effect Block, then use the [1 ]–[8 ] buttons
to adjust the Effect Depth for each Part.
Selecting an Effect Type for each Block
This section covers how to change the Effect Type of each Effect Block. The settings here can be saved to a
Registration Memory, Song or Style.
1
Call up the desired page from PANEL, STYLE or SONG by pressing the [MIXER/EQ]
button, repeatedly, if necessary.
page 110, the Effects of this Block are
PSR-S975/S775 Reference Manual
9
107