Philips 40PFK5300 User Manual page 33

your country.
If this results in having no channels installed or if
some channels are missing, you can select the
extended Full scan method. This method will take
more time to search for and install channels.
Digital channels
If you know your cable provider is not offering digital
channels, you can skip searching for digital channels.
Select Off.
Analogue channels
If you know your cable provider is not offering
analogue channels, you can skip searching for
analogue channels. Select Off.
Free / Scrambled
If you have a subscription and a CAM - Conditional
Access Module for pay TV services, select Free +
scrambled. If you did not subscribe to pay TV
channels or services, you can select Free channels
only.
For more information, press
up CAM - Conditional Access Module.
Reception quality
If you receive digital channels, you can check the
quality and signal strength of a channel.
If you have your own antenna, you can reposition the
antenna to try and improve the reception.
To check the reception quality of a digital channel . . .
1 - Tune to the channel.
2 - Press  and select Setup and press OK.
3 - Select Channel settings > Channel installation >
Digital : reception test and press OK.
The digital frequency is shown for this channel. If the
reception is poor, you can reposition your antenna.
To check the signal quality of this frequency again,
select Search and press OK.
To enter a specific digital frequency yourself, use the
remote control digit keys. Alternatively, select the
frequency, position the arrows on a number with 
and  and change the number with  and  . To
check the frequency, select Search and press OK.
If you use DVB-C to receive channels, the
option Symbol rate mode is available. For Symbol
rate mode, select Automatic, unless your cable
provider gave you a specific symbol rate value. To
enter the symbol rate value, use the number keys.

Keywords and look
Manual installation
Analogue TV channels can be manually installed,
channel by channel.
To install analogue channels manually . . .
1 - Press  and select Setup and press OK.
2 - Select Channel settings > Channel installation >
Analogue : Manual installation and press OK.
• System
To set up the TV system, select System and press OK.
Select your country or the part of the world where
you are now.
• Search channel
To find a channel, select Search channel and press
OK. Select Search and press OK. You can also enter a
frequency yourself. If the reception is poor, press
Search again. If you want to store the channel, select
Done and press OK.
• Fine tune
To fine tune a channel, select Fine tune and press OK.
You can fine tune the channel with  or  .
If you want to store the channel found, select Done
and press OK.
• Store current channel / Store as new channel
You can store the channel on the current channel
number or as a new channel number.
Select Store current channel or Store as new channel.
You can redo these steps until you have found all
available analogue TV channels.
33