Listening To Fm Radio; Setting The Frequency Steps; Selecting A Frequency For Reception - Yamaha HTR-2071 Owner's Manual

Listening to FM radio

You can tune into a radio station by specifying its frequency or selecting from
registered radio stations.
Note
▪ The radio frequencies differ depending on the country or region where the unit is being used. The
explanation of this section uses a display with frequencies used in U.K. and Europe models.
▪ If you cannot obtain good reception on the radio, adjust the direction of the FM antennas.

Setting the frequency steps

(Asia, Brazil and General models only)
At the factory, the frequency step setting is set to 50 kHz for FM. Depending on your
country or region, set the frequency steps to 100 kHz for FM.
1
Set the unit to standby mode.
2
When holding down STRAIGHT on the front panel, press z
(power).
z (power)
PROGRAM STRAIGHT
3
Press PROGRAM repeatedly to select "TU".
LINK MASTER
OUT 2 Hi -R es ENHANCER
ECO
TU••••••••FM50
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR
4
Press STRAIGHT to select "FM100".
5
Press z (power) to set the unit to standby mode and turn it on
again.

Selecting a frequency for reception

1
Press FM to select "TUNER" as the input source.
"TUNER" is selected as the input source and then the frequency currently
selected is displayed.
LINK MASTER
OUT 2
ECO
FM 87.50MHz
32
En
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -R es ENHANCER YPAO VOL. A- DRC
VOL. MUTE VIRTUAL