Advertisement
1. Before mounting the wide-angle lens
1-1 Safety precautions
Be sure to screw the Rear Projector wide lens and
adapter ring down completely. Unless they are securely
screwed on, they could fall off and cause damage or
injury (especially when the projector is ceiling-mounted).
1-2 Check product contents
Make sure that you have all the parts, as shown below, before starting.
Rear lens cap
User's manual (this document)
In addition to the included screwdriver, you will also need a Phillips
screwdriver, and various other common tools.
Memo
12
Warning
Zoom lens
Be sure to use a Phillips screwdriver that fits
the screws properly.
Front lens cap
Screwdriver
Used to tighter/remove
mounting screws
Hex wrench
Used to loosen and tighten
the ring mounting screws.
Advertisement
