Connect to digital amplifier/receiver
COAXIAL
1
Connect a coaxial cable (not supplied) to:
•
the
COAXIAL jack on this product.
•
the COAXIAL/DIGITAL input jack on
the device.
Connect analogue stereo system
1
Connect the audio cables (supplied) to:
•
the
AUDIO OUT L/R jacks on this product.
•
the audio input jacks on the device.
Connect USB flash drive
DVD PLAYER DVP3560K
1
Connect a USB flash drive to the
this product.
Note
•
This product can only play/view MP3, WMA, DivX
(Ultra) or JPEG files that are stored on a USB flash drive.
•
Press the
button to access the content and play
the files.
Connect power
Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the product.
•
Before connecting the AC power cord, ensure you have
completed all other connections.
8
EN
DIGITAL AUDIO
INPUT
COAXIAL
AUDIO IN
jack on
Note
•
The type plate is located on the back of the product.
1
Connect the AC power cable to the wall
socket.
»
The product is ready to be set up for use.
4 Get started
Prepare the remote control
1
Press and push the battery compartment to
slide it open (see "1" in the illustration).
2
Insert two AAA batteries with correct
polarity (+/-) as indicated.
3
Push and slide back the battery compartment
(see "3" in the illustration).
Note
•
If you are not going to use the remote control for a long
time, remove the batteries.
•
Do not mix batteries (old and new or carbon and
alkaline, etc.).
•
Batteries contain chemical substances, so they should be
disposed of properly.
Find the TV input channel
1
Press
to turn on this product.
2
Turn on the TV and switch to the video input
channel (refer to the TV user manual on how
to select the A/V input channel).