Advertisement
■ Haw to adjust the projection angle
Use the included to loosen the angle adjustment screw, align the projection with the center of the
screen, and then securely tighten the screw.
Inclination angle adjustment
傾き角度調整ネジ
(4 locations)
両側4カ所
【傾き角度】
[Inclination angle]
After securing the projector angle, if the angle is readjusted without loosening the screw, the
Caution
fastening area could be deformed, which could prevent it from being tightened again. When
readjusting the angle, Ioosen the angle adjustment screw before adjusting the angle.
If the adjustment is off center, readjust the angle.
4
173mm
15°
15°
After making the adjustment, be sure the screw is securely tightened.
【上下角度】
[Vertical angle]
10°
40°
10° 10°
[Left/Right angle]
Vertical angle adjustment
上下角度調整ネジ
(4 locations)
両側4カ所
Left/Right angle adjustment
(4 locations)
左右角度調整ネジ4カ所
Advertisement
