Table of Contents
Advertisement
Available languages
Available languages
Issue
LED "-- --"
Kettle is not on the power base while cooking. When a program
is flashing
is running, if you lift the kettle from its base and put it back within
and all the
five minute, the selected program will resume and the remaining
keys have
cooking time will be completed. If it takes longer than five minutes
no response
before kettle is put back on the power base, then the previously
other than
selected program will be cancelled and you would need to restart
power key.
the program again.
The kettle
beeps four
times and
switches off
automatically.
I try to switch
The kettle activated the boil-dry protection. This kettle is equipped
on the
with boil-dry protection. This device automatically switches off the
kettle, but it
kettle if it is accidentally pressed on when there is no water or not
switches off
enough water in it. The kettle will switch off and power-on light will
automatically.
go off. Let it cool down. The kettle is ready for use again.
Display shows
Er 01.
Food/ingredients stick to the heating plate (e.g. food has coked on
the heating plate) and it leads to poor temperature sensing. Clean
up the heating plate if coked is on the heating plate.
If you add water to the glass jar when the appliance is working, it
Display shows
can lead to poor temperature sensing. Make sure no additional
Er 02.
water is added to the jar when the appliance is working.
Operating voltage is not within the operating range (220-240 V).
Check and make sure the supply voltage is within the operating
range (220-240 V).
Display shows
Water exceeded 40°C in the glass Jar.
"Hot" when
Refill the glass jar with water below 40°C before using "Baby Milk"
using "Baby
program
Milk" program.
16
EN
Potential solution
Advertisement
Table of Contents
