Page 1
DV300H-JN.BUSAJJB_ENG_MFL54544155 DVD PLAYER XV-N680B XV-N682S For Customer Use : Enter below the Model No. and Serial No. which are located on the rear of cabinet. Retain this information for future reference. Model No. Serial No. INSTRUCTIONS LVT2008-001A...
Page 2
Use of controls, adjustments or the performance of procedures other than those specified herein may result in As an E ® Partner, JVC has NERGY hazardous radiation exposure. determined that this product or product To prevent direct exposure to laser beam, do not try to open models meet the E ®...
Page 3
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Introduction To ensure proper use of this product, please read this Notes on Discs owner’s manual carefully and retain it for future reference. Handling Discs This manual provides information on the operation Do not touch the playback side of the disc. Hold the and maintenance of your DVD player.
Types of Playable Discs Regional Code This unit has a regional code printed on the rear of the (8 cm / 12 cm disc) unit. This unit can play only DVD discs labeled as the same as the rear of the unit or “ALL”. Video CD (VCD/SVCD) (8 cm / 12 cm disc) Notes on Regional Codes...
Front Panel a 1 1 / / ' ' STANDBY/ON f N (PLAY) Switches the unit ON and OFF. Starts playback. b Disc Tray g x (STOP) Insert a disc here. Stops playback. c Z (OPEN/CLOSE) h . (SKIP) Opens or closes the disc tray. Returns to the beginning of current chapter or track or go to the previous chapter or track.
Remote Control DISPLAY STANDBY/ON (1 1 / / ' ' ) Accesses On-Screen Display. Switches DVD Player ON and OFF. DVD MENU OPEN/CLOSE (Z) Accesses menu on a DVD disc. Opens and closes the disc tray. b / B / v / V (left/right/up/down) Selects an item in the menu.
Installation and Setup Setting up the Player Progressive Scan • If your television is a high-definition or “digital The picture and sound of a nearby TV, VCR, or radio ready” television, you may take advantage of may be distorted during playback. If this occurs, the DVD player’s progressive scan output for position the player away from the TV, VCR, or radio, the highest possible video resolution.
HDMI connection If you have an HDMI TV or a monitor, you can HDMI compatible TV connect it to this player using an HDMI cable. 1. Set the TV’s source to HDMI (refer to TV Owner’s manual). 2. Connect the HDMI OUTPUT jack on the unit to the HDMI jack on a HDMI compatible TV or monitor (H).
Amplifier equipped with 2-channel analog stereo Audio Connection to Optional or Dolby Pro Logic ll / Pro Logic: Connect the left Equipment and right AUDIO OUTPUT jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo system, using the audio cables (A).
When you turn on for the first Initial Settings time By using the Setup menu, you can make various adjustments to items such as picture and sound. The menu for a language selection will appear when You can also set a language for the subtitles and the you turn on the unit for the first time.
DISPLAY LANGUAGE TV Aspect Menu Language 4:3 – Select when a standard 4:3 TV is connected. Select a language for the Setup menu and the on-screen display. 16:9 – Select when a 16:9 wide TV is connected. Disc Audio / Subtitle / Menu Display Mode Select the language you prefer for the audio track The Display Mode setting works only when the TV...
Sample Freq. (Frequency) AUDIO If your receiver or amplifier is NOT capable of Each DVD disc has a variety of audio output options. handling 96 kHz signals, select 48 kHz. When this Set the player’s AUDIO options according to the type choice is made, this unit automatically converts any of audio system you use.
OTHERS Set Playback Control (PBC) to On or Off. On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played in the same way as Audio CDs. B.L.E. (Black Level Expansion) To select the black level of playback pictures. Set your preference and monitor’s ability.
Operation General Features Buttons Operations Discs OPEN/CLOSE (Z) Opens or closes the disc tray. PAUSE/STEP (X) During playback, press PAUSE/STEP (X) to pause playback. Press PAUSE/STEP (X) repeatedly to play Frame-by- MPEG4 Frame. SKIP (. / >) During playback, press SKIP (. or >) to go to the MPEG4 next chapter/track or to return to the beginning of the current chapter/track.
Notes on general features: VCD 1.1 Last Scene Memory • On a Video CD with PBC, you must set PBC to Off This player memorizes last scene from the last disc on the setup menu to use the repeat function (See that is viewed.
ID3 TAG Playing an Audio CD or MP3/WMA file When playing a file containing information such as track titles, you can see the information by pressing DISPLAY. [ Title, Artist, Album, Year, Comment ] This unit can play Audio CDs or MP3/WMA files. Tips: •...
Programmed Playback Repeat Programmed Tracks Press REPEAT to select a desired repeat mode. The program function enables you to store your • TRACK: Repeats the current track. favorite tracks from any disc in the player memory. A program can contain 30 tracks. •...
Zoom Viewing a JPEG file During watching pictures, press ZOOM to enlarge the This unit can play JPEG files. video image (3 steps). You can move through the 1. Insert a JPEG files recording media. zoomed picture using b / B / v / V buttons. The PHOTO menu appears on the TV screen.
Playing a MPEG4 Movie file MPEG4 disc compatibility with this player is limited as follows: This unit can play MPEG4 files. • Available resolution size of the MPEG4 file is 1. Insert a MPEG4 file recording media. under 720x576 (W x H) pixel. The MOVIE menu appears on the TV screen.
Playing a DVD VR format Disc This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. 1. Insert a disc and close the tray. The DVD-VR menu appears on the TV screen. 2. Press v / V to select a title then press PLAY (N) or ENTER and playback starts.
Remote Control C1/C2/C3 Code Switching Refer to the information in this chapter before contacting a service technician. This unit is initially set to C3 code (JVC DVD PLAYER code). You can easily change the Remote Control code to C1 (JVC VCR code), C2...
Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Code Language Code Language Code Language Code Abkhazian 6566 Fiji 7074 Lingala 7678 Singhalese 8373 Afar 6565 Finnish 7073 Lithuanian 7684...
Troubleshooting Symptom Possible Cause Correction • The power cord is disconnected. • Plug the power cord into the wall outlet No power. securely. • No disc is inserted. • Insert a disc. (Check the disc indicator The power is on, but the DVD player does in the display window is lit.) not work.
Specifications General Power requirements: AC 120 V ~ 60 Hz Power consumption: Dimensions (Approx.): 430 x 39 x 192 mm (17 x 1.5 x 7.6 inches) (W x H x D) without foot Net weight (Approx.): 1.5 kg (3.3 lbs) Operating temperature: 5 °C to 35 °C (41 °F to 95 °F) Operating humidity:...