Canon 1318C002 User Manual page 52

Main Menu Sub Menu
CONTROL Network
Auto Power Off
Direct Power On
Startup Logo
Trigger
Auto Search
Dynamic Black
Language
Control ID
SERVICE (for Model Name
LX-MU800Z)
Serial Number
Software Version 1
Software Version 2
Control / Remote ID
Active Source
Signal Format
Pixel Clock
H/V Refresh Rate
Laser Hours
Thermal Status
Factory Reset
Factory Settings are in bold letters.
Network Mode Projector Control / Service
Off / On
Standby Power
DHCP Off / On
IP 192.168.0.100 (Enter to edit)
Subnet Mask 255.255.255.0 (Enter to edit)
Gateway 0.0.0.0 (Enter to edit)
DNS 0.0.0.0 (Enter to edit)
MAC 00:18:23:2c:eb:8a (example)
Off / On
Off / On
Off / On
Off / On
Off / On
Off / On
English / Français / Español / Deutsch / Português / Nederlands
/ Italiano / русский / 简体中文 / 繁體中文 / 한국어 / 日本語
Control ID Enable Off / On
Control ID Number 1 ~ 99
Remote ID Number 1 ~ 99 (Need to press IR remote once)
LX-MU800Z
DDE300001A (example)
MM01-SD07-FD19 (example)
LD06-22-RP02-3092 (example)
X / X
HDMI (example)
1920x1200 60Hz RB (example)
154.00 MHz (example)
74.038 KHz / 59.95 Hz (example)
000100 HRS (example)
Inlet Temperature 25 / 25 (°C)
DMD Temperature 32 (°C)
Laser Temperature 33 / 30 (°C)
Water Pump RPM 3900
Fan 1-3 Speed 1400 / 1400 / 1400
Fan 4-6 Speed 1400 / 1200 / 1200
Fan 7-9 Speed 1200 / 1400 / 1400
Fan 10-12 Speed 0 / 3000 / 3000
Fan 13-15 Speed 3000 / 3000 / 3000
Fan 16 Speed 3000
Reset Everything ? OK / Cancel
46
Setting