Electrolux EEC87300L User Manual
  1. Manuals
  2. Brands
  3. Electrolux Manuals
  4. Dishwasher
  5. EEC87300L
  6. User manual

Electrolux EEC87300L User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
EEC87300L
EN
Dishwasher
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Electrolux EEC87300L

Summary of Contents for Electrolux EEC87300L

  • Page 1 EEC87300L Dishwasher User Manual...

  • Page 2: Table Of Contents

    13. ADDITIONAL TECHNICAL INFORMATION...........27 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 8 (0.8) bar (MPa) Follow the maximum number of 13 place settings. • If the supply cord is damaged, it must be replaced by •...
  • Page 5 ENGLISH 2.4 Use • Make sure not to cause damage to the mains plug and to the mains • Do not put flammable products or cable. Should the mains cable need to items that are wet with flammable be replaced, this must be carried out products in, near or on the appliance.

  • Page 6: Product Description

    3. PRODUCT DESCRIPTION Ceiling spray arm Detergent dispenser Upper spray arm ComfortLift basket Lower spray arm Trigger handle Filters Lower basket handle Rating plate Upper basket Salt container Cutlery drawer Air vent Rinse aid dispenser 4. CONTROL PANEL On/Off button...

  • Page 7: Programme Selection

    ENGLISH 4.1 Display The ECOMETER indicates how the programme selection impacts energy The display shows the following and water consumption. The more bars information: are on, the lower the consumption is. • ECOMETER indicates the most • Indicators environmentally friendly programme •...
  • Page 8 ExtraHygiene ExtraHygiene provides better hygiene results by keeping the temperature between 65 and 70 °C for at least 10 minutes during the last rinsing phase. ExtraPower A. • Quick is the shortest programme (30min) suitable for washing a ExtraPower improves the washing load with fresh and light soil.
  • Page 9 ENGLISH Pro‐ Type of load Degree of Programme phases EXTRAS gramme soil • Crockery • Fresh • Wash 60 °C • ExtraPower • Cutlery • Lightly • Intermediate rinse • GlassCare dried-on • Final rinse 50 °C • ExtraHygiene • AirDry 1h 30min •...

  • Page 10: Basic Settings

    Water (l) Energy (kWh) Duration (min) Programme 0.821 AUTO Sense 9.6 - 13.1 0.74 - 1.06 120 - 170 Machine Care 8.9 - 10.9 0.58 - 0.70 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values.
  • Page 11 ENGLISH Settings Values Description Language List of languages Set the preferred language. (default: English) Reset settings Reset the appliance to the factory settings. PNC number Number Check the PNC number of your appli‐ ance. 1) For more details, refer to the information provided in this chapter. 6.1 The water softener in your area.
  • Page 12 Multi-tabs containing salt are not effective enough to soften hard water. 6.2 Rinse aid level The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase. It is possible to set the released quantity of rinse aid.
  • Page 13 ENGLISH 6.6 TimeBeam A. Previous button B. OK button C. Next button Use Previous and Next to switch TimeBeam displays the following between the basic settings and to information on the floor below the change their value. appliance door: Use OK to enter the selected setting and •...

  • Page 14: Before First Use

    The appliance returns to the programme The saved settings remain valid until you selection. change them again. 7. BEFORE FIRST USE 1. Make sure that the current level of the water softener agrees with the hardness of the water supply. If not, adjust the level of the water softener.

  • Page 15: Daily Use

    ENGLISH 7.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid designed specifically for dishwashers. 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation.
  • Page 16 8.3 How to select and start a programme using MY TIME selection bar 1. Slide your finger across MY TIME selection bar to choose a suitable programme. • The light related to the selected programme is on. • The ECOMETER indicates the...
  • Page 17 ENGLISH During the countdown, it is not possible By default, options must be to change the delay time and the activated every time before programme selection. you start a programme. When the countdown is complete, the If the latest programme programme starts.

  • Page 18: Hints And Tips

    8.10 How to cancel a running The function comes into operation automatically: programme • When the programme is completed. • After 5 minutes if a programme was Press and hold for about 3 seconds. not started. The appliance returns to the programme selection.

  • Page 19: Care And Cleaning

    ENGLISH 9.4 Before starting a • Soak cookware with burnt-on food before washing it in the appliance. programme • Put hollow items (cups, glasses and pans) with the opening facing Before you start the selected downwards. programme, make sure that: •...
  • Page 20 1. Use a descaler or a cleaning product designed specifically for dishwashers. Follow the instructions on the packaging. Do not put dishes in the baskets. 2. Press and hold simultaneously for about 3 seconds. The indicator flashes. The display shows the programme duration.
  • Page 21 ENGLISH 10.5 Cleaning the lower spray We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. 1. To remove the lower spray arm, pull it upwards. 5. Make sure that there are no residues of food or soil in or around the edge of the sump.
  • Page 22 10.6 Cleaning the upper spray We recommend to clean the upper spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. 1. Pull out the upper basket. 2. To detach the spray arm from the basket, press the spray arm upwards and simultaneously turn it clockwise.

  • Page 23: Troubleshooting

    ENGLISH 2. Move the upper basket to the lowest 5. To install the spray arm (C) back, level to reach the spray arm more insert the mounting element (B) in easily. the spray arm and fix it in the delivery 3.
  • Page 24 Problem and alarm code Possible cause and solution The programme does not • Make sure that the appliance door is closed. start. • If the delay start is set, cancel the setting or wait for the end of the countdown.
  • Page 25 ENGLISH Problem and alarm code Possible cause and solution Rattling or knocking • The tableware is not properly arranged in the bas‐ sounds from the inside of kets. Refer to basket loading leaflet. the appliance. • Make sure that the spray arms can rotate freely. The appliance trips the cir‐...
  • Page 26 Problem Possible cause and solution The interior of the appliance • This is not a defect of the appliance. Humid air con‐ is wet. densates on the appliance walls. Unusual foam during wash‐ • Use the detergent designed specifically for dish‐...

  • Page 27: Product Information Sheet

    12. PRODUCT INFORMATION SHEET Trade Mark Electrolux Model EEC87300L 911438367 Rated capacity (standard place settings) Energy efficiency class A+++ Energy consumption in kWh per year, based on 280 standard cleaning cycles using cold water fill and the consumption of the low power modes.
  • Page 28 Water supply pressure bar (minimum and maximum) 0.5 - 8 MPa (minimum and maximum) 0.05 - 0.8 Water supply max 60 °C Cold water or hot water 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption.
  • Page 29 ENGLISH...
  • Page 30 www.electrolux.com...
  • Page 31 ENGLISH...
  • Page 32 www.electrolux.com/shop...

Table of Contents