LG 84WT70PS-B.AWH Owner's Manual page 70

70
CONTROLLING THE MULTIPLE PRODUCT
18. ISM Method(Command: j, p)
Used to select the afterimage preventing function.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data
20: Color Wash
08: Normal
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
19. Energy Saving(Command: j, q)
To reduce the power consumption of the Monitor.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Minimum
02: Medium
03: Maximum
05: Screen Off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
20. Auto Config.(Command: j, u)
To adjust picture position and minimize image
shaking. Automatically.
* Only applies to RGB(PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data
01: To set
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
21. Remote Key(Command: m, c)
To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data: Refer to 'IR CODES'.
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
22. Backlight(Command: m, g)
To adjust light of the Backlight.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data
Min. 00H to Max. 64H : 0~100
* Refer to 'Real data mapping'.
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
* If Energy Saving is set to Auto/ Maximum/ Screen
off the Backlight function is disabled.
23. Fail Over Select(Command: m, i)
To select Fail Over mode.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]