Table of Contents
Advertisement
EasyLink (HDMI CEC)
This function allows you to operate the linked functions between our
brand devices with a EasyLink feature and this unit connecting
through an HDMI cable. You must connect this unit to our brand
EasyLink devices and be sure its EasyLink (HDMI CEC) setting is also
set to on.
1
Use
to select Preferences, then press OK.
2
Use
to select EasyLink, then press OK.
3
Use
to select the item you want to adjust, then press
OK.
Location
Master EasyLink
Auto TV On
EasyLink
HDMI mode
RC key forwarding
TV placement
HDMI-ARC
Retail Demo
Set the Master EasyLink to On or Off. The following additional
settings will be grayed out when you set them to Off.
Off
Master
EasyLink
On
This unit will turn on when the power on signal is sent from your
connected EasyLink device.
Off
Auto TV On
On
You can operate some functions such as disc playback or call up the
menu of the connected devices, by using this unit's remote control.
Off
RC key
forwarding
On
Note(s)
Pause may not work properly on some devices even if they are EasyLink
(HDMI CEC) compliant.
HDMI-ARC allows you to use Philips EasyLink to output TV audio
directly to a connected audio device, without the need for an
additional digital audio cable.
Off
HDMI-ARC
(HDMI 2 only)
On
Off
On
Disables all EasyLink.
Selects if you have connected an
external device that is compatible
with the EasyLink function.
This unit stays in Standby mode
even if you turn on your connected
EasyLink device.
This unit turns on automatically
when you turn on your connected
EasyLink device.
Disable RC key forwarding.
PLAY, PAUSE
/ STOP
/
/ REV
/ VOL + / – /
FWD
(MUTE) /
OPTIONS /
OK /
BACK / the NUMBER
buttons can be used to control your
connected EasyLink devices by this
unit's remote control.
Disable HDMI-ARC.
You can output TV audio through the
HDMI cable solely, provided both
the TV and device are HDMI-ARC
compliant.
Return your settings to default values
You can return settings to their default values.
1
Use
to select Restore default settings, then press OK.
2
Use
to select Reset AV settings or Reset all settings, then
press OK.
Reset AV settings
Reset all settings Return all the settings to their default values.
Accessibility
1
Press
and use
2
Use
to select TV settings, then press OK.
3
Use
to select Accessibility, then press OK.
Picture
Sound
Features
Installation
Accessibility
4
Adjust the following items.
Voice guide
Lets you configure Voice guide and its settings.
1
Use
to select Voice guide, then press OK.
Voice guide toggle
Speed
/
Pitch
Verbosity
Volume level
Return picture and sound settings to their
default values. The channel installation settings
are not affected.
to select Setup then press OK.
Voice guide
Caption settings
Digital audio preferences
Off
To set Voice guide to Off
On
To set Voice guide to On
Fast
Set voice guide speed based on
Normal
your preference
Slow
High
Set voice guide pitch based on
Normal
your preference
Low
Verbose
Set voice guide explanation
verbosity based on your
Succinct
preference
Loud
Set voice guide volume based on
Normal
your preference
Soft
Continued on next page.
36
.
English
Advertisement
Table of Contents
