Digital Audio Using The Hdmi/Arc Jack; Analog Audio Using The Audio Out Jack - Sharp LC-55LBU711U User Manual

Digital audio using the HDMI/ARC jack

Your TV can send sound to an ARC device, like an AV receiver, to create a home theater that uses two or more speakers. When you
connect external speakers or a sound bar, sound plays through your TV speakers and the external speakers or sound bar.
HDMI/ARC jack
1 Make sure that your TV's power cord is unplugged and the digital speaker system or sound bar is turned off.
2 Connect an HDMI® cable (not provided) to the HDMI/ARC jack on your TV and to the audio in jack on the digital speaker
system or sound bar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or sound bar, then set it to the correct source. See the documentation that came with
the digital speaker system or sound bar.
5 To configure the HDMI1(ARC) jack to output sound to an ARC device, on the Home menu, press
Settings, then press OK. Highlight System, then press OK. Highlight Control other devices (CEC), then press OK.
Highlight HDMI ARC, then press OK to check the box.
6 To turn off your TV speakers, on the Home screen, press
then press OK. Highlight TV speakers, then press OK. Press OK to remove the check from the TV speakers enabled
check box.

Analog audio using the audio out jack

When you connect an analog speaker system or sound bar to the audio out jack, the TV speakers are muted.
Audio out jack
1 Make sure that your TV's power cord is unplugged and the analog speaker system or sound bar is turned off.
2 Connect an audio cable (not provided) to the audio out jack on your TV and to the audio in jacks on the analog speaker
system or sound bar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the analog speaker system or sound bar, then set it to the correct source. See the documentation that came with
the analog speaker system or sound bar.
5 To turn off your TV speakers, on the Home screen, press
then press OK. Highlight TV speakers, then press OK. Press OK to remove the check from the TV speakers enabled
check box.
18
HDMI® cable
Note
Depending on the audio device you are connecting, you may need to
change the digital audio format for your TV. The default setting is Auto.
Audio cable
Note
Use the volume controls on the analog speaker system or sound bar to
control the volume.
or to highlight Settings, then press OK. Highlight Audio,
or to highlight Settings, then press OK. Highlight Audio,
Digital speaker system
Sound bar
or to highlight
Analog speaker system
Sound bar
LED TV