Philips 24BDL4151T/75 User Manual page 18

1.3.5. Installing the 4G Module
1. Carefully insert the flat head screwdriver into the gap of the rear
cover.
2. Slightly lift the rear cover open.
3. Install the 4G module board by tightening the two screws using a
suitable screwdriver.
4. Connect the 4G antenna cables to the connectors on the board.
5. Install back the rear cover.
1.3.6. Mounting the display to the wall
1. Wall mount holes grid: 100mm(H) x 100mm(V)
2. Wall mount screw: M4x(14+X) (X=thickness of wall mount plate)
1.3.7. Using the wire clamper
3
24BDL4151T