Related Manuals for LG LCU5500R-BN
Summary of Contents for LG LCU5500R-BN
- Page 1 OWNER'S MANUAL IR Bullet Camera Please read this manual carefully before operating your set and retain it for future reference. MODEL LCU5500R-BN LCU5500R-BP...
- Page 2 FCC WARNING: This equipment may generate or use radio CAUTION frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction RISK OF ELECTRIC SHOCK manual. The user could lose the authority to operate this DO NOT OPEN equipment if an unauthorized change or modification is made.
- Page 3 Caution: This installation should be made by a qualified • Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent service person and should conform to all local codes. type recommended by the manufacturer. Dispose Caution: To avoid electrical shock, do not open the of used batteries according to the manufacturer’s cabinet.
- Page 4 LG Electronics hereby declares Disposal of your old appliance that this/these product(s) is/are in compliance with the essential All electrical and electronic products requirements and other relevant should be disposed of separately from the provisions of Directive 2004/108/EC municipal waste stream via designated and 2011/65/EU.
- Page 5 Important Safety 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, Instructions and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the Read these instructions. manufacturer. Keep these instructions. 12.
- Page 6 Cautions for Safe Operation Operating and storage location Avoid viewing a very bright object (such as light fittings) Power Supply during an extended period. Avoid operating or storing the unit in the following locations. This camera must always be operated DC 12 V or AC 24 V. •...
-
Page 7: Table Of Contents
Contents 3D-DNR Setting ...............23 Privacy Mask Setting .............24 Features ................8 Special Menu Settings ............26 Accessories .................. 8 SYSTEM Setting ...............30 Part Names and Functions ............ 9 Specification ..............31 Connections ..............10 Precautions ................10 Connecting Display device ..........10 Connecting RS-485 Device ..........11 Connecting power source ...........11 Connecting Waterproof processing of cable ....12 Menu Operation.............. -
Page 8: Features
Features Accessories This IR Bullet Camera is designed for installation in a video surveillance system. Sunshield and Fixing This manual contains instructions on how to install and screw manage the IR Bullet Camera in your video surveillance system. Should you require any technical assistance, please contact authorized service center. -
Page 9: Part Names And Functions
Part Names and Functions a Lens Cover b c d b Angle adjuster Adjust the camera angle. c Tilt adjuster Adjust the tilt position. d Pan adjuster Adjust the pan position. e IR LED f IR Sensor g Focus lock lever f g h Fixes the focus position after adjusting. -
Page 10: Connections
Connections Connecting Display device The video signal connection between the camera and the Precautions monitor. • Be sure to switch off the unit before installation and connection. • The installation should be made by qualified service personnel or system installers. •... -
Page 11: Connecting Rs-485 Device
Connecting RS-485 Device Connecting power source Use these ports to connect an external device of RS-485 Connect a power source to the input terminal with 2 and format. 3 aligned correctly, and then connect a power source to the power input terminal as shown below. (recommended WHITE power adapter is AC 24 V/0.5 A, DC 12 V/0.5 A or above) TRX+... -
Page 12: Connecting Waterproof Processing Of Cable
Connecting Waterproof processing Warning: • The cables are not waterproofed completely. So seal- of cable the tube ends and the portions between cable cores as well as connecting portions with Butyl tape. Surely use the Butyl tape. Connect and tape the cables. •... -
Page 13: Menu Operation
Menu Operation BUTTON Description Used to move upper direction on the menu screen. OSD Menu control buttons Use this button to select an item or adjust the parameters. This camera utilizes an on-screen user MENU. To set items on the menu, use the following buttons. DOWN Used to move lower direction on the menu screen. -
Page 14: Osd Menu Overview
OSD Menu Overview BURST ON/OFF LEVEL LOW/ MIDDLE/ HIGH/USER AUTO The following table shows the list of menu items and op- DWELL 3 SEC to 60 SEC DAY/ TIME tions. You can adapt the camera to your requirements by NIGHT setting up the respective items in these menus. - Page 15 RET/ TOP / END OFF /MOSAIC FACTORY RESET PRIVACY DISPLAY / COLOR1 to CAMERA ID OFF / 1 to 255 MASK COLOR8 LG / PELCO-D CIRCLE PROTOCOL POSITION ,/ 0 to 100 / PELCO-P SYSTEM COMMUNICATION 2400 bps, 4800 bps, POSITION ;.
-
Page 16: General Operation
General Operation Exposure Settings Press [SET] button. You can set the exposure options using the EXPOSURE The Main OSD menu screen appears on the monitor. menu. Select [EXPOSURE] option on the [CAMERA SETTING] menu. Use [LEFT] or [RIGHT] button to select a mode. Press [SET] button and the EXPOSURE menu appears. - Page 17 Backlight setting • BLC: Camera's backlight compensation feature helps alleviate issues of visibility in high contrast Use Backlight option to view the object clearly in backlight areas. Set the BLC limit. conditions. Note: If the [DAY/NIGHT] option is set to [NIGHT] mode, the BLC mode of the [EXPOSURE] function is not available and [---] mark is displayed.
- Page 18 AGC (Automatic Gain Control) setting • OFF: Not used. BRIGHTNESS setting If the images are too dark, change the maximum [AGC] value to make the images brighter. But noise is increase. You can increase the brightness of the darkened video. If you set the brightness to lower value, the image is darkened.
- Page 19 SHUTTER (Shutter Speed) setting SENS-UP setting Select the desired shutter speed for camera exposure. You If pictures are not clear due to darkness, this SENS-UP can change the shutter speed to higher speed to capture operation would increase the sensitivity of picture. fast-moving subjects, though the image becomes darker.
-
Page 20: White Balance Settings
Note: • MANUAL: You can set the white balance options manually. If you set to one of the SHUTTER options except AUTO on the [SHUTTER] menu, the [SENS-UP] setting is not available > RED: Obtains the optimum amount of red gain. -
Page 21: Day/Night Setting
Day/Night Setting > DWELL TIME: Use [LEFT] or [RIGHT] button to select a dwell time. • DAY: Color mode enabled. • NIGHT: Black-and-white mode enabled. > BURST: Use [LEFT] or [RIGHT] button to select [ON] or [OFF]. Select [DAY/NIGHT] option. Use [LEFT] or [RIGHT] button to select mode for Day/Night function. -
Page 22: Smartir Setting
SmartIR Setting • SIZE : Enlarge or decrease the vertical size of the prevent saturation zone. SmartIR function improve the sensitivity in the low luminance. SmartIR analyze the image of the screen, Motion Detection Setting when the subject is close. Then SmartIR reduce the IR LED brightness and gain to prevent saturation of the closed The motion detection detects the moving objects in the subject. -
Page 23: 3D-Dnr Setting
3D-DNR Setting OFF on the STATE. • Use [UP] or [DOWN] to select an option then use [LEFT] or [RIGHT] button to adjust the option. > POSITION : Moves horizontal position of the mask. > POSITION : Moves vertical position of the mask. -
Page 24: Privacy Mask Setting
Privacy Mask Setting use [LEFT] or [RIGHT] button to adjust the option. This function is aiming at the protection of personal POSITION : Moves horizontal privacy, selecting a screen part black not to be displayed in position of the mask. the screen. - Page 25 SIZE : Enlarge or decrease the horizontal size of the mask. SIZE : Enlarge or decrease the vertical size of the mask. RADIUS SIZE : You can adjust the RADIUS SIZE (0 to 100). • POLYGON : > Use [LEFT] or [RIGHT] button to select a mask (MASK1 to MASK2) on the [MASK SELECTION].
-
Page 26: Special Menu Settings
Special Menu Settings D-ZOOM (Digital Zoom ) Setting You can select the digital zoom level. This menu lets you adjust and set up D-ZOOM, D-EFFECT, SHARPNESS, COLOR, SYNC, USER TITLE, LANGUAGE function by yourself in the SPECIAL menu. Select [D-ZOOM] option on the [SPECIAL] menu. Use [LEFT] or [RIGHT] button to select a [ON] then Select [SPECIAL] option. - Page 27 SHARPNESS Setting • TILT: Use [LEFT] or [RIGHT] button to move the screen. The degree to which the boundary of the two portions is Note: clearly distinguished. If you set the [D-ZOOM] to ON, the ZOOM level is set to [x1.0] automatically.
- Page 28 COLOR Setting SYNC Setting You can switch the displayed picture to gray scale or color. Select [SYNC] option on the [SPECIAL] menu. Select [COLOR] option on the [SPECIAL] menu. The [SYNC] option is set to [INT] automatically. Use [LEFT] or [RIGHT] button to change a adjust the Note: option.
- Page 29 USER TITLE Setting LANGUAGE Setting You can use the camera identification to assign a number Select the viewer language for the camera setup menu and and character to the camera. To disappear the user title, OSD information display. select [OFF]. Select [USER TITLE] option on the [SPECIAL] menu.
-
Page 30: System Setting
SYSTEM Setting communication settings. Press [SET] button to confirm your selection. Notes: • You need to set up [Save & Report] for save [Camera ID], [Protocol], [Baud & Rate] changes. • The menu screen is move to top menu, after set up [Factory Reset]. -
Page 31: Specification
Specification Item LCU5500R-BN LCU5500R-BP Signal System NTSC Image Sensor 6 mm (1/3 Type) CCD Lens 2.8 mm to 11 mm Vari-focal Lens, F1.2 Color 650 TV Lines Horizontal Resolution 700 TV Lines Day & Night ICR (AUTO / DAY / NIGHT) Sens-up OFF / AUTO(x2, ... - Page 32 Item LCU5500R-BN LCU5500R-BP Communication RS-485, Coaxial Communication RS-485 LG, Pelco-D, Pelco-P Backlight Compensation OFF / WDR / BLC / HSBLC Privacy Masking 14 Masks 2D + 3D-DNR Protection IP66 Power Source DC 12 V / AC 24 V DC 12 V...