GE GEC-4VPHUB Installation Sheet

Multi-channel passive transceiver hubs

Advertisement

Quick Links

GE
Security
Multi-Channel Passive
Transceiver Hubs Installation
Sheet
Introduction
GE Security Multi-Channel Passive Transceiver Hubs transmit or receive base-
band video signals over unshielded twisted pair (UTP) wires, point-to-point, for
distances up to 750 feet (228 m). They also provide support for the "up the coax"
Pan/Tilt/Zoom (PTZ) control signals.
These passive hubs are 1U in height and can be wall, desk or rack mounted.
They use Category 2-7 twisted pair wires and do not require power. They provide
built-in surge suppression to protect video equipment against damaging voltage
spikes and provide noise immunity to ensure quality images.
The included RJ-45 adapter provides an easy way to connect the passive hubs to
other GE VPD products via Cat-5 cables and RJ-45 connectors. These passive
hubs are bidirectional and support Up-the-Coax Pan/Tilt/Zoom telemetry signals.
Any unused pair of UTP cables can also be used for transporting other telemetry
signals.
The following model numbers are covered in this document:
GEC-4VPHUB
GEC-8VPHUB
GEC-16VPHUB
GEC-32VPHUB
1 of 9
P/N 1069682 • REV 1.0 • ISS 14APR10
© 2010 GE Security, Inc.

Advertisement

Table of Contents
loading

Summary of Contents for GE GEC-4VPHUB

  • Page 1 The included RJ-45 adapter provides an easy way to connect the passive hubs to other GE VPD products via Cat-5 cables and RJ-45 connectors. These passive hubs are bidirectional and support Up-the-Coax Pan/Tilt/Zoom telemetry signals.
  • Page 2 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any ventilation openings. 8) Install in accordance with the manufacturer’s instructions.
  • Page 3: Wiring Technical Notes

    We recommend using short 18 AWG solid wires for ground connections. • GE VPD products follow the EIA/TIA 568 standard. There are two wire color- code standards: EIA/TIA 568A and EIA/TIA 568B. Either standard can be used for making connections as long as the RJ-45 jacks at both ends of each cable follow the same standard.
  • Page 4: Important Safety Warnings

    To reduce the risk of fire or electrical shock, do not expose these products to rain, moisture, dripping or splashing. • No objects filled with liquids, such as vases, shall be placed on GE equipment. • DO NOT block ventilation openings to let sufficient airflow to the UTP devices.
  • Page 5: Application Drawing

    Application Drawing Figure 1: Multi-channel short-range, passive-to-passive, UTP application Camera End Installation UTP: • Connect the UTP wires carrying video signals to the terminal block input of the receiver hub. If the UTP is terminated with a RJ-45 connector, then use either the RJ-45 connector or the provided RJ-45 adapter to connect to the transceiver hub.
  • Page 6: Technical Specifications

    Video: • Use the provided 2-foot (60cm) coax patch cords to connect the BNC video inputs of video receiving devices such as DVRs or matrix switches. • Confirm that your receiving device is terminated with a single 75-ohm terminator. Ground: •...
  • Page 7: Included Accessories

    Black ABS plastic, UL rating of 94 V-0 (GEC-4VPHUB) Extruded Aluminum and sheet metal Dimensions (W x H x D) GEC-4VPHUB: 4.5 x 1.73 x 1 in. (11.5 x 4.4 x 2.5 cm) GEC-8VPHUB: 17 x 1.74 x 3 in. (43 x 4.2 x 7.6 cm) GEC-16VPHUB: 17 x 1.74 x 3 in.
  • Page 8 EIA/TIA 568A, B Color Codes Midspan/Control Room Data Connections GEC-4VPHUB (Cameras 1-4) GEC-8VPHUB/GEC-16VPHUB/GEC-32VPHUB (Cameras 1-8) GEC-16VPHUB/GEC-32VPHUB (Cameras 9-16) 8 of 9 P/N 1069682 • REV 1.0 • ISS 14APR10...
  • Page 9: Regulatory Information

    Regulatory information Manufacturer GE Security, Inc. HQ and regulatory responsibility: GE Security, Inc., 8985 Town Center Parkway, Bradenton, FL 34202, USA EU authorized manufacturing representative: GE Security B.V., Kelvinstraat 7, 6003 DH Weert, The Netherlands Regulatory N4131 information North American...

This manual is also suitable for:

Gec-8vphubGec-16vphubGec-32vphub

Table of Contents