Turning Off The Power - Sony VPL-DX271 Operating Instructions Manual

Turning Off the Power

1
Press the ?/1 key on the unit or the remote commander.
The projector starts shutdown and turns off. If you press the ?/1 key within 10 seconds of
the message being displayed, shutdown is canceled.
When "Power Supply" on "ECO" in the Connection/Power menu is set to "On," press start
to display the message (page 25). After about ten seconds, the lamp will turn off, and the
unit continues to supply power. Select "Select 'Power Off' to shutdown." to stop supplying
power.
Press the power button while the message is displayed to light the lamp again.
Note
• Do not turn off the projector soon after the lamp lights. It may cause a malfunction of the
lamp (does not light ,etc.).
• "Power Supply" is VPL-DX271/DX241/DW241 only.
2
Unplug the AC power cord from the wall outlet.
Turning off without displaying the confirmation message
?/1
Press and hold the
Note
If you turn off the unit soon after the lamp is turned on, the confirmation message will be
displayed and may take a longer time for the unit to turn off.
key on the unit for a few seconds (page 31).
Projecting an Image
15