2.2 Loading Documents on the ADF for Scanning(2)
file://///Hd-htgle21/Manual/fi-5120C_5220C-lynx2/OG/R03/contents/EN/02/c02_02_02.htm (2/2)2006/08/29 15:59:53
Place one card at a time into the Auto Document Feeder.
●
ID card feeding requires the card to be fed through the Auto Document Feeder in
●
portrait mode as in the following figure.
Smooth cards should be placed face down in the Auto Document Feeder.
●
Embossed cards (raised lettering) should be placed with the embossed side down.
●
The card to be scanned should be within the ISO7810 compliance, type ID-1.
●
ISO7810-compliant, Type ID-1 card
Material:
PVC (Poly vinyl chloride) or PVCA (Polyvinyl chloride acetate)
Dimensions:
3.4 inch (height) x 2.1 inch (width) / 86 mm x 54 mm
Thickness:
0.03 ± 0.003inch / 0.76 ± 0.08mm
Cards that are excessively rigid or less flexible may not feed smoothly and excessive
●
noise may occur.
Cards should be clean from oil and without labels.
●
Cards cannot be scanned when the imprinter is installed.
●
All Rights Reserved Copyright 2006 © PFULIMITED
1
3
4
2