Bass Reactor - Panasonic RB-M700 Owner's Manual

Operation

Bass reactor

You can amplify the bass in the music or videos you are playing back and enjoy a powerful experience by
directly transferring the vibrations to the headphones themselves.
®
While playing back music or videos on a device connected via Bluetooth
Press [BASS i] or [BASS j] to adjust the Bass reactor strength level.
• This unit vibrates along with the bass of the music or video being played back.
• Bass reactor strength level: Off ,-. Low ,-. Middle ,-. High (The default value is Low.)
• Even when the power is turned off, the setting before turning it off will be stored to memory.
• The playback time depends on the music source and the Bass reactor strength level.
Note
• This may not be effective depending on the music or video being played back.
• If you feel ill while using the Bass reactor, set the Bass reactor to Off.
• Turn on this unit to use the Bass reactor when using this unit with the detachable cord (supplied) connected.
• Adjust the Bass reactor strength level and the volume so that the sound is not distorted.
13