Canon Pixma MG3550 Online Manual page 180

The icon appears in the notification area on the desktop, and the Scan-from-PC
Settings screen appears. In that case, skip ahead to Step 3.
2. In the notification area on the desktop, right-click
Selector EX), then select Settings....
The Scan-from-PC Settings screen appears.
3. Select your scanner or printer from Scanners.
Normally, the MAC address of your scanner or printer is already selected after the
network setup. In that case, you do not need to select it again.
Important
If multiple scanners exist on the network, multiple model names appear. In that
case, you can select one scanner per model.
4. Click OK.
Setting for Scanning with IJ Scan Utility
To scan from IJ Scan Utility using a scanner or printer connected to a network, specify your
scanner or printer with IJ Network Scanner Selector EX, then follow the steps below to
change the connection status between it and the computer.
1. Start IJ Scan Utility.
2. Select "Canon XXX series Network" (where "XXX" is the model name)
for Product Name.
Note
For USB connection, select "Canon XXX series" (where "XXX" is the model
name) for Product Name.
3. Click Settings... to use another scanner connected to a network.
4. Click (General Settings), then click Select in Product Name.
The Scan-from-PC Settings screen of IJ Network Scanner Selector EX appears.
Select the scanner you want to use and click OK.
5. In the Settings (General Settings) dialog box, click OK.
180
(IJ Network Scanner