Cvp-700: Assembly - Yamaha CVP-109 Reference Booklet

1
A
52
CVP-109/107/105/103/700
Downloaded from: http://www.usersmanualguide.com/
D
C B

CVP-700: Assembly

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
CAUTION
• Be careful not to confuse parts, and be sure to install all parts in
the correct direction. Please assemble in accordance with the
sequence given below.
• Assembly should be carried out by at least two persons. At-
tempting to assemble alone is dangerous.
• Be sure to use the correct screw size, as indicated above. Use
of incorrect screws can cause damage.
• Be sure to tighten up all screws upon completing assembly of
each unit.
• The entire package must be turned over during assembly, so
select an area that is large enough for the unpacking and as-
sembly operation.
Z
Open the carton and remove the parts from
the upper level.
Referring to the illustration, make sure that you have all the
required parts.
• A bench may be supplied or optional, depending on
A
Front leg
B
Front leg
C
Rear leg
D
Pedal box
the location in which the instrument was purchased.
x 20
5 x 20 mm long screws
x 2
Cord holders
AC power cord