Table of Contents
Advertisement
When you access the Setup page for the first time,
enter "root" in the Name box and enter "Projector"
in the Password box of User.
When you log in for the first time, the window that
prompts you to change the password is displayed.
Follow the instructions on the screen to change
the password.
The Name box of the Administrator is preset to "root."
Entry area for [Administrator]
When you change the password, input a new
password after deleting the password (*****) that
was set.
The password of the administrator and user
should be 8 to 16 characters that includes both
alphabet and numeric characters.
Alphabet is case-sensitive.
The default password "Projector" cannot be set as
a new password.
Note
If you forget your password, consult with qualified Sony
personnel.
The password will be reset with your permission.
Entry area for [User]
Confirming the Information regarding the
Projector
You can confirm the current settings for the
projector on the Information page.
Information area
Operating the Projector from a Computer
You can control the projector from the computer
on the Control page.
Operation area
The functions of the buttons shown in the
operation area are the same as the keys on the
remote commander.
Using the e-mail report Function
Set the e-mail report function on the Setup page.
Entered values will not be applied unless you click
on [Apply].
30
Advertisement
Table of Contents
