Philips 50PFL5922 User Manual page 36

T T V placement
To apply the best settings for your TV, select wall mount or stand mount.
1
Use to select Preferences, then press OK.
2
Use to select TV placement, then press OK.
3
Use to select Wall mounted or On a TV stand, then press OK.
Retail Demo
When you set Location to Retail, E-sticker (Electronic Sticker) is displayed.
E-sticker can be turned off using procedure below.
1
Use to select Preferences, then press OK.
2
Use to select Retail Demo, then press OK.
3
Use to select Off, then press OK.
Use Philips EasyLink
Your TV supports Philips EasyLink, which enables one-touch play and
one-touch standby between EasyLink-compliant devices. Compliant
devices must be connected via an HDMI connector.
One-touch play
When you connect your TV to devices that support one-touch play, you
can control your TV and the devices with one remote control. For
example, when you press (Play) on your DVD remote control, your TV
automatically switches to the correct channel to show the DVD content.
One-touch standby
When you connect your TV to devices that support standby, you can use
your TV remote control to put your TV and all connected HDMI devices
in standby mode. You can perform one-touch standby using the remote
control from any of the connected HDMI devices.
System audio control
When you connect your TV to HDMI CEC compliant devices, your TV can
switch automatically to play audio from the connected device. To use
one-touch audio, you must map the audio input from the connected
device to your TV. You can use the remote control from the connected
device to adjust the volume.
Remote control (RC) key forwarding
RC key forwarding allows you to control EasyLink-compliant devices
using your TV remote control.
HDMI-ARC (Audio Return Channel) (HDMI 2 only)
HDMI-ARC allows you to use Philips EasyLink to output TV audio directly
to a connected audio device, without the need for an additional digital
audio cable. Be sure that the device is HDMI CEC and ARC compliant, and
that the TV is connected to the device using an HDMI cable attached to
both HDMI-ARC connectors.
Note(s)
•
Philips does not guarantee 100% interoperability with all HDMI CEC devices.
•
The EasyLink-compliant device must be switched on and selected as the source.
EasyLink (HDMI CEC)
This function allows you to operate the linked functions between our
brand devices with a EasyLink feature and this unit connecting through
an HDMI cable. You must connect this unit to our brand EasyLink devices
and be sure its EasyLink (HDMI CEC) setting is also set to on.
1
Use to select Preferences, then press OK.
2
Use to select EasyLink, then press OK.
3
Use to select the item you want to adjust, then press OK.
Location Master EasyLink
Auto TV On
EasyLink
HDMI mode RC key forwarding
TV placement HDMI-ARC
Retail Demo
Set the Master EasyLink to On or Off. The following additional settings
will be grayed out when you set them to Off.
Off
Master
EasyLink
On
This unit will turn on when the power on signal is sent from your connected
EasyLink device.
Off
Auto TV On
On
You can operate some functions such as disc playback or call up the
menu of the connected devices, by using this unit's remote control.
Off
RC key
forwarding
On
Note(s)
•
Pause may not work properly on some devices even if they are EasyLink (HDMI CEC)
compliant.
HDMI-ARC allows you to use Philips EasyLink to output TV audio directly
to a connected audio device, without the need for an additional digital
audio cable.
Off
HDMI-ARC
(HDMI 2 only)
On
36
Off
On
Disables all EasyLink.
Selects if you have connected an
external device that is compatible with
the EasyLink function.
This unit stays in Standby mode even
if you turn on your connected EasyLink
device.
This unit turns on automatically when
you turn on your connected EasyLink
device.
Disable RC key forwarding.
/ STOP /
PLAY, PAUSE
FWD / REV / VOL + / – /
(MUTE) / OPTIONS / / OK /
BACK / the NUMBER buttons can
be used to control your connected
EasyLink devices by this unit's remote
control.
Disable HDMI-ARC.
You can output TV audio through the
HDMI cable solely, provided both the
TV and device are HDMI-ARC
compliant.
Continued on next page.
.
English