Power Connections - LG DP571D-P Owner's Manual

Power connections

Connecting the AC Adapter
Connect the supplied AC Adapter from the unit to a power socket.
Plug into a power source.
* The actual set may differ from the drawing.
AC adapter
• This AC adapter operates on 100 - 240 V - 1.0 A 50 / 60 Hz.
• Contact an electrical parts distributor for assistance in selecting a suitable
AC plug adapter or AC cord set.
• Manufactured by NANJING WANLIDA TECHNOLOGY CO., LTD.
7
Connecting the Automotive adapter
This unit and its automotive adapter are designed for use in vehicles that have
8.5 - 15 volt, negative ground electrical systems. This is standard for most
vehicles. If your vehicle has a different type of electrical system, the DC power
system cannot be used.
Automotive adapter
• This automotive adapter operates on DC 8.5 - 15 V.
Plug into the carʼs cigarette
• Contact an electrical parts distributor for assistance in selecting a suitable
lighter socket.
• Manufactured by GRAND POWER ELECTRONIC TECHNOLOGY
Caution
• To prevent electrical shock and possible damage to your unit or vehicle,
• A 3 amp. 250 V fuse for protection is installed in the automotive adapter.
• While the engine is being started, disconnect the automotive adapter from
Plug into the "DC 12 V IN" jack.
• Do not operate your unit when the car battery is discharged.
• If the vehicleʼs supply voltage drops below approximately 10 volts, your unit
• Do not leave your unit in a place where the temperature exceeds 45 °C
automotive adapter.
(SHENZHEN) CO., LTD.
always unplug the automotive adapter from the cigarette lighter socket
before you remove the plug from your unit.
the carʼs cigarette lighter socket.
Peak current from the car generator may cause the DC fuse to blow.
may not work properly.
(113 °F), or the pick-up device may be damaged.
Examples include:
- Inside a car with the windows closed and in direct sunshine.
- Near a heating appliance.