Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZDT36001FA
Summary of Contents for Zanussi ZDT36001FA
- Page 1 User Manual GETTING STARTED? EASY. ZDT36001FA EN User Manual Dishwasher...
-
Page 2: Safety Information
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. - Page 3 If the supply cord is damaged, it must be replaced by the • manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Put the cutlery in the cutlery basket with the sharp ends • pointing down or put them in the cutlery drawer in a horizontal position with the sharp edges down.
- Page 4 • The water inlet hose has a safety valve and a sheath with an inner mains cable. WARNING! Dangerous voltage. • If the water inlet hose is damaged, immediately close the water tap and disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose.
-
Page 5: Easy Start
EASY START On/off button XtraDry button Display Delay button Programme button (up) CANCEL button Programme button (down) Indicators TimeSaver button INDICATORS End indicator. Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme operates. BEAM-ON-FLOOR The Beam-on-Floor is a light that shows on the kitchen floor below the appliance door. - Page 6 Consumption values Degree of soil Programme Programme phases Type of load Duration Energy Water (min) (kWh) Normal soil • Prewash 0.935 10.5 Crockery and • Wash 50 °C cutlery • Rinses • • Prewash 46-170 0.7 - 1.7 8 - 15 Crockery, cut- •...
- Page 7 OPTIONS In the other programmes the setting of XtraDry is Desired options must be activated permanent and it is automatically used in next every time before you start a cycles. This configuration can be changed at any programme. time It is not possible to activate or This option is not available with deactivate options while a programme is running.
-
Page 8: Adjusting The Water Softener
• The display shows the current setting: e.g. • Activation or deactivation of AirDry. Before entering the user mode, make sure the = level 5. appliance is in the programme selection mode. 2. Press to change the setting. Each pressing To enter the user mode: of the button increases the level number by... -
Page 9: Activating The Acoustic Signal For The End Of Programme
When rinse aid chamber is empty, the While the drying phase operates, the rinse aid indicator is turned on device opens the appliance door. The notifying to refill rinse aid. If the drying door is then kept ajar. results are satisfactory while using By default, AirDry is activated with all programmes multi-tablets only, it is possible to deactivate the notification for refilling... -
Page 10: Daily Use
ADDING SALT Before the first use, put one litre of water in the salt container. CAUTION! Water and salt can come out of the salt container during filling. To prevent corrosion, start a programme immediately after filling the salt container. ADDING RINSE AID The rinse aid helps to dry the dishes without streaks and stains. -
Page 11: Adding Multi-Tablets
ADDING MULTI-TABLETS • Adjust the water softener to the lowest level. SETTING AND STARTING A PROGRAMME consumption and the programme duration. After closing the door, the appliance continues from the The AUTO OFF function point of interruption. This function decreases energy consumption by If the door is opened during the drying deactivating automatically the appliance when it is phase, before AirDry automatically... -
Page 12: Hints And Tips
HINTS AND TIPS GENERAL • Do not use more than the correct quantity of detergent. Refer to the instructions on the Follow the hints below to ensure optimal cleaning detergent packaging. and drying results in daily use and to help you protect the environment. -
Page 13: Care And Cleaning
UNLOADING THE BASKETS After the programme is completed, 1. Let the tableware cool down before you water can still remain on the inside remove it from the appliance. Hot items can be surfaces of the appliance. easily damaged. 2. First remove items from the lower basket, then from the upper basket. -
Page 14: Cleaning The Top Spray Arm
2. Wash the spray arm under running water. Use 2. Move the upper basket to the lowest level to a thin pointed tool, e.g. a toothpick, to remove reach the spray arm more easily. particles of soil from the holes. 3. -
Page 15: Troubleshooting
TROUBLESHOOTING If the appliance does not start or it stops during With some problems, the display shows an operation, first check if you can solve the problem alarm code. by yourself with the help of the information in the The majority of problems that can occur can table or contact an Authorised Service Centre. -
Page 16: The Washing And Drying Results Are Not Satisfactory
Problem and alarm code Possible cause and solution The appliance door is difficult • The appliance is not levelled. Loosen or tighten the adjustable to close. feet (if applicable). • Parts of the tableware are protruding from the baskets. Rattling/knocking sounds from •... - Page 17 Problem Possible cause and solution The dishes are wet. • For the best drying performance activate the option XtraDry and set AirDry . • The programme does not have a drying phase or has a drying phase with low temperature. •...
-
Page 18: Product Information Sheet
PRODUCT INFORMATION SHEET Trade Mark Zanussi Model ZDT36001FA 911536449 Rated capacity (standard place settings) Energy efficiency class Energy consumption in kWh per year, based on 280 standard cleaning cycles using cold water fill and the consumption of the low power modes. The actual energy consumption will de- pend on how the appliance is used. -
Page 19: Environmental Concerns
ENVIRONMENTAL CONCERNS with the symbol with the household waste. Recycle materials with the symbol . Put the Return the product to your local recycling facility or packaging in relevant containers to recycle it. Help contact your municipal office. protect the environment and human health by recycling waste of electrical and electronic appliances. - Page 20 WWW.ZANUSSI.COM/SHOP...