Turning On The Power - Hitachi MC-WU5506M User Manual

Turning on the power

1.
Make sure that the power cord is rmly and correctly connected to the
projector and the outlet.
2.
Make sure that the POWER indicator
is lighted in steady orange. Then
remove the lens cover.
3.
Press the STANDBY/ON button on
the projector or the remote control.
The projection lamp will light up and the
POWER indicator will begin blinking in
green. When the power is completely on,
the indicator will stop blinking and light in
steady green.
WARNING
not look into the lens of the projector or look inside of the projector through any
of the projector's openings, since the projection ray may cause a trouble on
your eyes.
locking the beam by something causes high temperature and could result in
re or smoke.
NOTE • Please power on the projector prior to the connected devices.
• The projector has the DIRECT POWER ON function, which can make the
projector automatically turn on. or more information, please see User's
Manual - Operating Guide. (
12
A strong light is emitted when the projector's power is on. Do
1)
STANDBY/ON button
POWER indicator
MYBUTTON
INPUT
ASPECT PbyP AUTO FREEZE
MAGNIFY FOCUS ZOOM VOLUME
ON
OFF
PAGE
UP GEOMETRY PICTURE MUTE
DOWN INTERACTIVE NETWORK BLANK
ESC MENU
ENTER
OSD MSG RESET