Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the next
wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
Wipe the rubber seal dry.
■
Leave the door and detergent drawer
■
open so that any residual water can
evaporate.
Always wait until the programme
■
ends, as the appliance could still be
locked. Then switch the appliance on
and wait for it to unlock.
Q
Appliance settings
Y ou can change the following settings:
A p p l i a n c e s e t t i n g s
The volume of the end signal.
■
The volume of the button signal.
■
Switching the drum care information
■
signal on/off.
Appliance settings
You will need to activate the setting mode
in order to change these settings.
1/2/3/4...
positions on the
programme selector
Activate setting mode:
1.
Set the programme selector to
position 1. The appliance is switched
on.
2.
Touch and hold the 0 Spin Speed
button and, at the same time, turn the
programme selector clockwise to
position 2. Release the 0 Spin Speed
button.
The setting mode is activated and the
preset setting appears in the display
panel.
Changing the volume and drum care
information
Use the ñ Ready in button to change
the following settings at the
corresponding programme selector
positions:
2: The volume of the end signal.
■
3: The volume of the button signals.
■
0 = off, 1 = quiet,
2 = medium, 3 = loud,
4 = very loud
4: Switching the drum care
■
information signal on/off.
on
Ž
Œ off
Exiting setting mode
You can now end the process and set the
programme selector to the Off position.
The settings are saved.
en
39